[NSRCA-discussion] Lets fly--- Now!
Atwood, Mark
atwoodm at paragon-inc.com
Sun Jan 31 18:06:26 AKST 2010
All the credit goes to Dave. His kit is very well engineered. Great structural strength. Even moderate quality wood yields a good wing. If you take care to get good sheeting then you'll be in the same range I'm in. And the way it locks together getting a straight wing and razor straight trailing edge is pretty simple. I think he's found his new calling in life...
Mark Atwood
Paragon Consulting, Inc. | President
5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124
Phone: 440.684.3101 x102 | Fax: 440.684.3102
mark.atwood at paragon-inc.com | www.paragon-inc.com
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ron Van Putte
Sent: Sunday, January 31, 2010 9:35 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Lets fly--- Now!
Pardon my French, but DAMN! That's light.
Ron
On Jan 31, 2010, at 8:13 PM, Atwood, Mark wrote:
> Now...back to flying! Just finished skinning another set of Dave
> Snow Spark wings. Both under 9.5oz ready to cover. Should save
> almost 10oz over my existing Spark wings.
>
> Mark Atwood
> Paragon Consulting, Inc. | President
> 5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124
> Phone: 440.684.3101 x102 | Fax: 440.684.3102
> mark.atwood at paragon-inc.com | www.paragon-inc.com
>
>
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-
> discussion-bounces at lists.nsrca.org] On Behalf Of James Oddino
> Sent: Sunday, January 31, 2010 6:52 PM
> To: General pattern discussion
> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
>
> I never had satisfactory results running anything on Parallels that
> required USB/hardware like sims, battery chargers and data logging
> stuff. Fusion is better but I still just reboot but not very often.
>
> Jim
>
>
> On Jan 31, 2010, at 3:28 PM, Atwood, Mark wrote:
>
>> Ahhh, but you're missing the point. I run both XP and Windows 7
>> virtuals continuously on my Mac and always have. (Most of my work
>> related stuff is in windows). BUT...I reboot my Mac about, oh,
>> once a year, just because. The virtuals need to be rebooted much
>> more often of course...Lol
>>
>> I would hate to have to reboot back and forth in and out of Mac OS
>> just to run a Sim. I may...but would prefer to have something
>> that runs native to the Mac.
>>
>> Mark Atwood
>> Paragon Consulting, Inc. | President
>> 5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124
>> Phone: 440.684.3101 x102 | Fax: 440.684.3102
>> mark.atwood at paragon-inc.com | www.paragon-inc.com
>>
>>
>> -----Original Message-----
>> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-
>> discussion-bounces at lists.nsrca.org] On Behalf Of James Oddino
>> Sent: Sunday, January 31, 2010 4:31 PM
>> To: General pattern discussion
>> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
>>
>> It's funny but I have the same reaction to running Windows apps on
>> my iMac. In reality, if you boot up in Windows the iMac works as
>> good or better and is no more of a pain than any other machine
>> running Windows. XP that is, I haven't tried Vista or 7.
>
>>
>> Jim
>>
>>
>>
>>
>> On Jan 31, 2010, at 9:50 AM, Atwood, Mark wrote:
>>
>>> Neither VMware Fusion, nor parallels provide direct access to the
>>> graphics processor.
>>>
>>> Bootcamp running XP Sp 2 works but that's a pain.
>>> --------------------------
>>> Sent from my BlackBerry Wireless Handheld
>>>
>>>
>>> ----- Original Message -----
>>> From: nsrca-discussion-bounces at lists.nsrca.org <nsrca-discussion-
>>> bounces at lists.nsrca.org>
>>> To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
>>> Sent: Sun Jan 31 12:36:04 2010
>>> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
>>>
>>> VM ware or parallels...
>>>
>>> -----Original Message-----
>>> From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-
>>> discussion-bounces at lists.nsrca.org] On Behalf Of Atwood, Mark
>>> Sent: Sunday, January 31, 2010 12:29 PM
>>> To: 'nsrca-discussion at lists.nsrca.org'
>>> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
>>>
>>> Now if only somebody would make one that runs on a Mac ...
>>> --------------------------
>>> Sent from my BlackBerry Wireless Handheld
>>>
>>>
>>> ----- Original Message -----
>>> From: nsrca-discussion-bounces at lists.nsrca.org <nsrca-discussion-
>>> bounces at lists.nsrca.org>
>>> To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
>>> Sent: Sun Jan 31 12:26:06 2010
>>> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
>>>
>>> http://www.redrockethobbies.com/
>>> Phoenix_R_C_Pro_Flight_Simulator_2_5_p/rtm2500.htm
>>> $124 w free shipping if you apply an online coupon. Seems like
>>> they all on BO but saying it will be in this week. I'm in.
>>> Mark they have Airtronics adaptors but I'm not sure they work
>>> with the new radio. I have old JR stuff for the transmitter. Mike
>>>
>>> --- On Sun, 1/31/10, Phil Spelt <chuenkan at comcast.net> wrote:
>>>
>>>> From: Phil Spelt <chuenkan at comcast.net>
>>>> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
>>>> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
>>>> Date: Sunday, January 31, 2010, 10:17 AM
>>>>
>>>>
>>>> The timing is great -- I am considering a
>>>> move from
>>>> RealFlite 3 to a newer RC sim. What does Phoenix
>>>> offer that RF 5
>>>> does not, and vice-versa???
>>>>
>>>>
>>>> At 11:12 AM 1/31/2010, you wrote:
>>>>
>>>> Me too.
>>>> It is too cold to
>>>> fly here and I am missing some flying.....
>>>>
>>>>
>>>> Vicente "Vince" Bortone
>>>>
>>>>
>>>> ----- Original Message -----
>>>>
>>>> From: "Mark Atwood"
>>>> <atwoodm at paragon-inc.com>
>>>>
>>>> To: "nsrca-discussion at lists.nsrca.org"
>>>> <nsrca-discussion at lists.nsrca.org>
>>>>
>>>> Sent: Sunday, January 31, 2010 10:07:40 AM GMT -06:00
>>>> US/Canada
>>>> Central
>>>>
>>>> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
>>>>
>>>>
>>>> How much is the phoenix software?? This is really
>>>> intriguing.
>>>> I'd be interested in feedback from those that are
>>>> participating.
>>>>
>>>>
>>>>
>>>> -mark
>>>>
>>>> --------------------------
>>>>
>>>> Sent from my BlackBerry Wireless Handheld
>>>>
>>>>
>>>>
>>>>
>>>> ----- Original Message -----
>>>>
>>>> From: nsrca-discussion-bounces at lists.nsrca.org
>>>> <nsrca-discussion-bounces at lists.nsrca.org>
>>>>
>>>> To: nsrca-discussion at lists.nsrca.org
>>>> <nsrca-discussion at lists.nsrca.org>
>>>>
>>>> Sent: Sun Jan 31 10:57:18 2010
>>>>
>>>> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
>>>>
>>>>
>>>> This is really exciting; a new approach. I did
>>>> some more
>>>> checking and it looks like there is a voice chat (although
>>>> I don't have a
>>>> recording device on this computer). There is, however
>>>> a chat
>>>> capability which is really cool. That way we can
>>>> communicate with
>>>> each other and other pilots that want to
>>>> join.
>>>> Lets try this out again- can take turns flying and
>>>> critiquing and
>>>> see how it works.
>>>>
>>>> Lets shoot for another flying session at 7 PM (east
>>>> coast time)
>>>> tonight (Sunday, 31 January). For those who have a
>>>> Phoenix flight
>>>> simulator and want to join, lets go for it. I set up
>>>> a
>>>> "Pattern Flying" session using the Moscow, Italy
>>>> flying
>>>> site.
>>>>
>>>>
>>>>
>>>> Don
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> -----Original Message-----
>>>>
>>>> From: Stuart Chale <schale at optonline.net>
>>>>
>>>> To: General pattern discussion
>>>> <nsrca-discussion at lists.nsrca.org>
>>>>
>>>> Sent: Sat, Jan 30, 2010 8:01 pm
>>>>
>>>> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
>>>>
>>>>
>>>>
>>>>
>>>> Agree I would try but don't have Phoenix either.
>>>>
>>>> Stuart
>>>>
>>>>
>>>> Pete Cosky wrote:
>>>>
>>>>
>>>> Neat idea….too
>>>> bbad I don’t
>>>> have Phoenix.
>>>>
>>>>
>>>>
>>>> From:
>>>> nsrca-discussion-bounces at lists.nsrca.org
>>>> [
>>>> mailto:nsrca-discussion-bounces at lists.nsrca.org] On
>>>> Behalf Of
>>>> tocdon at netscape.net
>>>>
>>>> Sent: Saturday,
>>>> January 30,
>>>> 2010 7:29 PM
>>>>
>>>> To:
>>>> nsrca-discussion at lists.nsrca.org
>>>>
>>>> Subject:
>>>> [NSRCA-discussion]
>>>> Lets fly--- Now!
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Hey guys. 7:19
>>>> PM East Coast
>>>> time and its snowing. Who wants to get some
>>>> practice. Join me
>>>> for some on-line simulator practice.
>>>>
>>>>
>>>>
>>>> From the Phoenix
>>>> RC simulator,
>>>> go to multiplayer under pull down menu. Select GO
>>>> Online, Fill in
>>>> the Online Sign in (put a name I can recognize) and hit
>>>> "sign
>>>> in" select Connecticut Flying. Hit "Join
>>>> Session"
>>>>
>>>>
>>>>
>>>> Joseph is
>>>> buzzing around, but
>>>> we'll move to pattern flying if anyone is interested
>>>> this evening.
>>>> If there is interest we can do coaching sessions or an
>>>> on-line, live
>>>> pattern contest. What do you think?
>>>>
>>>>
>>>>
>>>> Regards,
>>>>
>>>> Don
>>>>
>>>>
>>>> ________________________________
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>>
>>>> NSRCA-discussion
>>>> mailing
>>>> list
>>>>
>>>>
>>>> NSRCA-discussion at lists.nsrca.org
>>>>
>>>>
>>>>
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>>
>>>> NSRCA-discussion mailing list
>>>>
>>>> NSRCA-discussion at lists.nsrca.org
>>>>
>>>>
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>>>
>>>> _______________________________________________
>>>>
>>>> NSRCA-discussion mailing list
>>>>
>>>> NSRCA-discussion at lists.nsrca.org
>>>>
>>>>
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>>> _______________________________________________
>>>>
>>>> NSRCA-discussion mailing list
>>>>
>>>> NSRCA-discussion at lists.nsrca.org
>>>>
>>>>
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>>
>>>> -->
>>>> There are only two types of aircraft -- fighters and
>>>> targets.
>>>>
>>>>
>>>> Phil Spelt, Past President,
>>>> Knox County Radio
>>>> Control Society, Inc.
>>>>
>>>> URL:
>>>>
>>>> http://www.kcrctn.com
>>>>
>>>> AMA--1294, Scientific Leader Member, SPA--177
>>>>
>>>> My URL:
>>>>
>>>> http://mywebpages.comcast.net/~chuenkan/
>>>>
>>>> (865) 435-1476 v
>>>> (865) 604-0541
>>>> c
>>>>
>>>>
>>>> -----Inline Attachment Follows-----
>>>>
>>>> _______________________________________________
>>>> NSRCA-discussion mailing list
>>>> NSRCA-discussion at lists.nsrca.org
>>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>>
>>>
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>> _______________________________________________
>>> NSRCA-discussion mailing list
>>> NSRCA-discussion at lists.nsrca.org
>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
More information about the NSRCA-discussion
mailing list