[NSRCA-discussion] JR Servo Availability

[Pascoe,Tim [Burlington]]

So just the SA versions are discontinued? I'll have to talk to the LHS again, and see if they can order the metal gear version.

 

Thanks for that clarification.

 

Tim

 

________________________________

From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Stuart Chale
Sent: Friday, January 22, 2010 2:06 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] JR Servo Availability

 

It has been mentioned that the SA servos have been discontinued but the metal gear versions can be converted to the SA versions with a set of nylon gears.
JR now sells the conversion set JRPS8411SAC.  The 8231 gear set has also been mentioned to convert the 8411 to 8411SA (output gear is not replaced).  Both items are probably the same.

9411's can be converted to SA's with the 911 gear set.
Stuart C.


Pascoe,Tim [Burlington] wrote: 

I've been searching around for some of the JR servos I've used in the past, and which were recommended to me by the list on my last question. I've been getting contrary information regarding whether they have been discontinued or not, and no clear answer for which servos are intended to replace them. Any answers out there from someone in the know?

 

I was looking for:

 

8411SA 

9411SA

8611A

 

Thanks,

 

Timothy Pascoe 
Physical Sciences Specialist

 

Yak Shaving - Any seemingly pointless activity which is actually necessary to solve a problem which solves a problem which, several levels of recursion later, solves the real problem you're working on

 

Environment Canada / Environnement Canada
Canada Centre for Inland Waters / Centre Canadien des Eaux Intérieures
867 Lakeshore Road / 867, chemin Lakeshore
Burlington, Ontario / Burlington (Ontario) 
L7R 4A6

Tel/Tél: (905) 336-6239
Fax/Téléc: (905) 336-4609
E-mail/C. élec: tim.pascoe at ec.gc.ca <blocked::mailto:tim.pascoe at ec.gc.ca> 
Government of Canada/Gouvernement du Canada 
This e-mail represents the opinions and views solely held by its author and in no manner may be considered as representing those of his/her employer.

 

 



________________________________



 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100122/d038fb3d/attachment.html>