[NSRCA-discussion] Fwd: Hatch Latch

[Jon Lowe]

 Ron, It sounds like you really worked to make sure that latch didn't work.  CA AND epoxy??!!

 

Jon Lowe
 

 

-----Original Message-----
From: Ronald Van Putte <vanputte at cox.net>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Sat, Jan 9, 2010 7:35 pm
Subject: Re: [NSRCA-discussion] Fwd:  Hatch Latch


Trust me, you can lock it up with epoxy too.


Ron


On Jan 9, 2010, at 7:33 PM, J Shu wrote:


 
Epoxy Ron... Then you don't glue it closed ;)
 

Regards,
Jason
www.shulmanaviation.com
www.composite-arf.com

 
  
----- Original Message ----- 
  
From:   Ronald Van Putte   
  
To: General pattern discussion   
  
Sent: Saturday, January 09, 2010 8:31   PM
  
Subject: Re: [NSRCA-discussion] Fwd:   Hatch Latch
  


I agree that it's more sturdy, but, if you plan to CA it to the   canopy, you should unscrew the handle and remove the pin and spring so you   don't end up with a locked up system (guess how I know this).  


  
Ron
  

  
  
On Jan 9, 2010, at 6:47 PM, Verne Koester wrote:

  
    
I     agree. I’ve tried various latches and the red one from Hobby-Lobby is the     best.

Verne

    
    
From:     nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]     On Behalf Of Ed Lyerly
Sent: Saturday, January 09, 2010     6:43 PM
To: 'General pattern discussion'
Subject: Re:     [NSRCA-discussion] Fwd: Hatch Latch


I've     used this one from Hobby Lobby on several airplanes …. over several years,     with no problems.
Ed

http://www.hobby-lobby.com/hatchlatch.htm?pSearchQueryId=392265



    
    
From:     nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]     On Behalf Of Ronald Van Putte
Sent: Saturday, January 09,     2010 6:16 PM
To: General pattern discussion
Subject: Re:     [NSRCA-discussion] Fwd: Hatch Latch


No argument on the plastic arm being fragile.      However, with a smoothly engaging assembly, being beefy isn't     necessary and they are very light.
    

    
Ron
    

    
    
On Jan 9, 2010, at 3:50 PM, Jon Lowe     wrote:

    
I     can't recommend these.  The plastic lever arm is too brittle/not beefy     and is easily broken with just a little force, such as a tight fit.      I've broken one, and so has Gary Courtney.  If the arm breaks, they are     a bear to get open.  I like a lot of stuff from Hobby City, but this     isn't one of them.
    

    
Jon     Lowe
    

    

    
-----Original     Message-----
From: Ronald Van Putte <vanputte at cox.net>
To: General     pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent:     Sat, Jan 9, 2010 3:07 pm
Subject: [NSRCA-discussion] Fwd: Hatch     Latch
    
Here     they are:  http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=9218     
    

    
Ron
    

    

    
Begin     forwarded message:

    
From:     Ronald     Van Putte <vanputte at cox.net>
    
Date:     January     9, 2010 2:48:36 PM CST
    
To:     General     pattern discussion <nsrca-discussion at lists.nsrca.org>
    
Subject:     Re: [NSRCA-discussion] Hatch Latch
    
Reply-To:     General     pattern discussion <nsrca-discussion at lists.nsrca.org>
    


Mike     Hester put some slick white plastic ones on the canopy of the Black Magics     he built.  I think they come from China and have seen them on the     HobbyCity/HobbyKing web site.  Mike, are you out there?     
    

    
Ron     Van Putte
    

    
    
On     Jan 9, 2010, at 2:08 PM, Ron Hansen wrote:

    
    
Can     anyone recommend a spring loaded hatch latch that will work on a 1/8” thich     fuse side to hold on my canopy?
    

    
Thanks

    
_______________________________________________
    
NSRCA-discussion     mailing list
    
NSRCA-discussion at lists.nsrca.org
    
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


    
_______________________________________________
    
NSRCA-discussion     mailing list
    
NSRCA-discussion at lists.nsrca.org
    
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



=     
    
_______________________________________________









 
NSRCA-discussion mailing list









 
NSRCA-discussion at lists.nsrca.org









 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion









 

    
_______________________________________________
    
NSRCA-discussion mailing list
    
NSRCA-discussion at lists.nsrca.org
    
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



    
_______________________________________________
    
NSRCA-discussion mailing list
    
NSRCA-discussion at lists.nsrca.org
    
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



  




_______________________________________________
NSRCA-discussion   mailing   list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 


=
 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 
=
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100110/1df7ef66/attachment.html>