[NSRCA-discussion] Fwd: Hatch Latch

[Verne Koester]

I agree. I've tried various latches and the red one from Hobby-Lobby is the
best.

 

Verne

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ed Lyerly
Sent: Saturday, January 09, 2010 6:43 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Fwd: Hatch Latch

 

I've used this one from Hobby Lobby on several airplanes .. over several
years, with no problems.

Ed

 

http://www.hobby-lobby.com/hatchlatch.htm?pSearchQueryId=392265

 

 

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ronald Van
Putte
Sent: Saturday, January 09, 2010 6:16 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Fwd: Hatch Latch

 

No argument on the plastic arm being fragile.  However, with a smoothly
engaging assembly, being beefy isn't necessary and they are very light.

 

Ron

 

On Jan 9, 2010, at 3:50 PM, Jon Lowe wrote:

 

I can't recommend these.  The plastic lever arm is too brittle/not beefy and
is easily broken with just a little force, such as a tight fit.  I've broken
one, and so has Gary Courtney.  If the arm breaks, they are a bear to get
open.  I like a lot of stuff from Hobby City, but this isn't one of them.

 

Jon Lowe

 

 

-----Original Message-----
From: Ronald Van Putte <vanputte at cox.net>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Sat, Jan 9, 2010 3:07 pm
Subject: [NSRCA-discussion] Fwd: Hatch Latch

Here they are:
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=9218 

 

Ron

 

 

Begin forwarded message:

 

From: Ronald Van Putte <vanputte at cox.net>

Date: January 9, 2010 2:48:36 PM CST

To: General pattern discussion <nsrca-discussion at lists.nsrca.org>

Subject: Re: [NSRCA-discussion] Hatch Latch

Reply-To: General pattern discussion <nsrca-discussion at lists.nsrca.org>

 

Mike Hester put some slick white plastic ones on the canopy of the Black
Magics he built.  I think they come from China and have seen them on the
HobbyCity/HobbyKing web site.  Mike, are you out there? 

 

Ron Van Putte

 

On Jan 9, 2010, at 2:08 PM, Ron Hansen wrote:

 

Can anyone recommend a spring loaded hatch latch that will work on a 1/8"
thich fuse side to hold on my canopy?

 

Thanks

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

= 

_______________________________________________













 
NSRCA-discussion mailing list













 
NSRCA-discussion at lists.nsrca.org













 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion













 

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100110/b86dd2e9/attachment.html>