[NSRCA-discussion] Fwd: Hatch Latch

[Jon Lowe]

 I can't recommend these.  The plastic lever arm is too brittle/not beefy and is easily broken with just a little force, such as a tight fit.  I've broken one, and so has Gary Courtney.  If the arm breaks, they are a bear to get open.  I like a lot of stuff from Hobby City, but this isn't one of them.

 

Jon Lowe
 

 

-----Original Message-----
From: Ronald Van Putte <vanputte at cox.net>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Sat, Jan 9, 2010 3:07 pm
Subject: [NSRCA-discussion] Fwd:  Hatch Latch


Here they are:  http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=9218


Ron




Begin forwarded message:


From: Ronald Van Putte <vanputte at cox.net>
Date: January 9, 2010 2:48:36 PM CST
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Subject: Re: [NSRCA-discussion] Hatch Latch
Reply-To: General pattern discussion <nsrca-discussion at lists.nsrca.org>


  Mike Hester put some slick white plastic ones on the canopy of the Black Magics he built.  I think they come from China and have seen them on the HobbyCity/HobbyKing web site.  Mike, are you out there?


Ron Van Putte


On Jan 9, 2010, at 2:08 PM, Ron Hansen wrote:


 
Can anyone recommend a spring loaded hatch latch that will work on a 1/8” thich fuse side to hold on my canopy?
 

Thanks
 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
 


=
 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100109/153aec17/attachment.html>