[NSRCA-discussion] A few questions for the pattern list

[Ihncheol Park]

Michael,

 

1: APC 16x6 or 17x6 maybe the best for 3D.  It will rev a little high, but I
saw a lot of guys with  YS120s use.  20% will be just fine.  

 

2: I have stock mufflers.   YSE4335 ($40.00)  It is the muffler set comes
with YS110.  It fits on 91 ~ 170.  

 

3: I would suggest AC/DC chargers: Hyperion 606i, Venom AC/DC, Dynamite's
AC/DC are good and under $130.00  All these are 6-cell balance charger and
charges all types of batteries.

 

http://www3.towerhobbies.com/cgi-bin/wti0001p?
<http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXUAB8&P=ML>
&I=LXUAB8&P=ML  Venom chargers were popular because of the cheap price and
bunch of connectors coming with, but  there is no long term user report on
them yet.  I sold some, but most of them are charging small packs under
3000mAh (lipo).  Venom's support isn't that great.

 

http://www.allerc.com/product_info.php?cPath=9
<http://www.allerc.com/product_info.php?cPath=9&products_id=3367>
&products_id=3367   very well known.  I sold more than enough, but no
accessories.  Balancing boards are available separate.

 

http://www.horizonhobby.com/Products/Default.aspx?ProdID=DYN4064   Newest
charger, Highest charge rate.  8amp.  Basic charge connectors come with the
charger.  Integrated balancer, so will need converter if the packs have
different balancing connector.  If you use packs with higher charge rate, it
will do very well.  

 

4: Hatori 822 is the one that Jason Shulman uses.

 

Ihncheol 

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Michael Cohen
Sent: Friday, January 01, 2010 2:00 PM
To: NSRCA
Subject: [NSRCA-discussion] A few questions for the pattern list

 

Oh great and powerful NSRCA list, I have a few questions for you to start
off this new year.  So, without any further delay:
 
1)  I am FINALLY building a U Can Do 3D I won at a pattern contest in ABQ
about 4 years ago (winters in MI are good for something), and I am planning
on putting a 120AC in it since that is the only thing between a .61 2 stroke
and the YS engines I have.  I need to keep the pitch at 6 or below, so what
diameter prop would work for the 120AC with a 6 pitch?
 
2)  Does anyone sell the YS mufflers for these engines any more or is the
something else out there that will work?
 
3)  I need to buy a new charger for 2010.  I do not fly large electrics, so
I just need something for the NiMH and 3000 mAh Li-pos that I have for the
receiver batteries and the small electrics.  Any suggestions?
 
4)  I am soon expecting the arrival of a CARF Integral to replace my dearly
beloved Brio that tried to unsuccessfully mid-air mate with another pattern
plane last year.  I am planning on using a YS 160DZ with a Hatori 821
Muffler and a Nishioka mount.  Which Hatori Header is the correct one to
use, the 822 or the 823?
 
Thanks and Happy New Year
 
Mike Cohen
 

  _____  

Hotmail: Free, trusted and rich email service. Get it
<http://clk.atdmt.com/GBL/go/171222984/direct/01/>  now.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100102/8881aa73/attachment.html>