[NSRCA-discussion] A few questions for the pattern list

[Larry Odom]

That would be the #822
  -----Original Message-----
  From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of J Shu
  Sent: Friday, January 01, 2010 3:21 PM
  To: General pattern discussion
  Subject: Re: [NSRCA-discussion] A few questions for the pattern list


  #4- The higher rise one

  Regards,
  Jason
  www.shulmanaviation.com
  www.composite-arf.com

    ----- Original Message -----
    From: Michael Cohen
    To: NSRCA
    Sent: Friday, January 01, 2010 3:00 PM
    Subject: [NSRCA-discussion] A few questions for the pattern list


    Oh great and powerful NSRCA list, I have a few questions for you to
start off this new year.  So, without any further delay:

    1)  I am FINALLY building a U Can Do 3D I won at a pattern contest in
ABQ about 4 years ago (winters in MI are good for something), and I am
planning on putting a 120AC in it since that is the only thing between a .61
2 stroke and the YS engines I have.  I need to keep the pitch at 6 or below,
so what diameter prop would work for the 120AC with a 6 pitch?

    2)  Does anyone sell the YS mufflers for these engines any more or is
the something else out there that will work?

    3)  I need to buy a new charger for 2010.  I do not fly large electrics,
so I just need something for the NiMH and 3000 mAh Li-pos that I have for
the receiver batteries and the small electrics.  Any suggestions?

    4)  I am soon expecting the arrival of a CARF Integral to replace my
dearly beloved Brio that tried to unsuccessfully mid-air mate with another
pattern plane last year.  I am planning on using a YS 160DZ with a Hatori
821 Muffler and a Nishioka mount.  Which Hatori Header is the correct one to
use, the 822 or the 823?

    Thanks and Happy New Year

    Mike Cohen



----------------------------------------------------------------------------
    Hotmail: Free, trusted and rich email service. Get it now.


----------------------------------------------------------------------------


    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100101/d839d81e/attachment.html>