[NSRCA-discussion] 9CAP case finish question

[Tony]

I like the Futaba FASST stuff, but I do understand about the Bind-N-Fly.
That is really nice for the indoor stuff!  

Tony Stillman, President
Radio South, Inc.
139 Altama Connector, Box 322
Brunswick, GA  31525
1-800-962-7802
www.radiosouthrc.com

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tom Simes
Sent: Thursday, February 25, 2010 12:15 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] 9CAP case finish question

On Thu, 25 Feb 2010 12:00:59 -0500
"Tony" <tony at radiosouthrc.com> wrote:

> Tom:
> I have the case fronts in stock, along with the 3 labels you will need
> to replace.  It takes some tear-down time to get it all apart and back
> together.  Let me know if you want the parts to do yourself, or want
> to send it in...

Thanks Tony,

I'm thinking I'll send it in, it's been a few years since the radio has
been in for a check up and the piece of mind is well worth it!  We got
another 4 inches of snow at the house already this morning and it's
still coming down, so no better time than the present...

On a related note, what 2.4g module do you like?  I don't have any 2.4g
gear at the moment so I'm not wedded to a technology yet.  The Spectrum
bind and fly indoor setups are pretty compelling though...

-- 
Tom
 
======================================================================
   "Z-80 system stack overflow.  Shut 'er down Scotty, the system's
         sucking mud" - Error message on TRS 80 Model-16B

Tom Simes                                       simestd at netexpress.com 
======================================================================
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion