[NSRCA-discussion] OS120FS camgear orientation

[Tony]

Phil:

Thanks, that is what I thought and that is how I re-assembled it, and it
looks like the valve sequence is correct.

Thanks!

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Phil Spelt
Sent: Monday, February 01, 2010 2:33 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] OS120FS camgear orientation

 

Tony,

I remember a picture from a friend of mine who rebuilds these engines:  He
had a ruler lined up with the push rod cover, and the dot on the cam was at
the bottom aligned with the ruler.  I have seen that engine run, and it is
running quite well...

At 01:56 PM 2/1/2010, you wrote:



I can't find my document on the OS cam gear orientation.. Does the mark on
the cam gear go up or down at Top Dead Center? 
 
Tony Stillman, President
Radio South, Inc.
139 Altama Connector, Box 322
Brunswick, GA  31525
1-800-962-7802
www.radiosouthrc.com <http://www.radiosouthrc.com/> 
 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-->There are only two types of aircraft -- fighters and targets.

Phil Spelt, Past President, Knox County Radio Control Society, Inc.
       URL: http://www.kcrctn.com <http://www.kcrctn.com/> 
AMA--1294,  Scientific Leader Member, SPA--177
      My URL: http://mywebpages.comcast.net/~chuenkan/
      (865) 435-1476 v  (865) 604-0541 c 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100201/4c638af6/attachment.html>