[NSRCA-discussion] Lets fly--- Now!

mike mueller mups1953 at yahoo.com
Mon Feb 1 04:37:30 AKST 2010 

 Dave's a structural engineer. He worked at getting a wood wing design that would be easy to build and stay straight. Mike

--- On Sun, 1/31/10, Atwood, Mark <atwoodm at paragon-inc.com> wrote:

> From: Atwood, Mark <atwoodm at paragon-inc.com>
> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Date: Sunday, January 31, 2010, 9:06 PM
> All the credit goes to Dave. 
> His kit is very well engineered.  Great structural
> strength.  Even moderate quality wood yields a good
> wing.  If you take care to get good sheeting then
> you'll be in the same range I'm in.  And the way it
> locks together getting a straight wing and razor straight
> trailing edge is pretty simple.  I think he's found his
> new calling in life...
> 
> Mark Atwood
> Paragon Consulting, Inc.  |  President
> 5885 Landerbrook Drive Suite
> 130, Cleveland Ohio, 44124 
> Phone: 440.684.3101 x102  |  Fax: 440.684.3102
> mark.atwood at paragon-inc.com
>  |  www.paragon-inc.com
> 
> 
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org]
> On Behalf Of Ron Van Putte
> Sent: Sunday, January 31, 2010 9:35 PM
> To: General pattern discussion
> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
> 
> Pardon my French, but DAMN!  That's light.
> 
> Ron
> 
> On Jan 31, 2010, at 8:13 PM, Atwood, Mark wrote:
> 
> > Now...back to flying!  Just finished skinning
> another set of Dave  
> > Snow Spark wings.  Both under 9.5oz ready to
> cover.   Should save  
> > almost 10oz over my existing Spark wings.
> >
> > Mark Atwood
> > Paragon Consulting, Inc.  |  President
> > 5885 Landerbrook Drive Suite 130, Cleveland Ohio,
> 44124
> > Phone: 440.684.3101 x102  |  Fax:
> 440.684.3102
> > mark.atwood at paragon-inc.com 
> |  www.paragon-inc.com
> >
> >
> > -----Original Message-----
> > From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca- 
> > discussion-bounces at lists.nsrca.org]
> On Behalf Of James Oddino
> > Sent: Sunday, January 31, 2010 6:52 PM
> > To: General pattern discussion
> > Subject: Re: [NSRCA-discussion] Lets fly--- Now!
> >
> > I never had satisfactory results running anything on
> Parallels that  
> > required USB/hardware like sims, battery chargers and
> data logging  
> > stuff.  Fusion is better but I still just reboot
> but not very often.
> >
> > Jim
> >
> >
> > On Jan 31, 2010, at 3:28 PM, Atwood, Mark wrote:
> >
> >> Ahhh, but you're missing the point.  I run
> both XP and Windows 7  
> >> virtuals continuously on my Mac and always
> have.  (Most of my work  
> >> related stuff is in windows).  BUT...I reboot
> my Mac about, oh,  
> >> once a year, just because.  The virtuals need
> to be rebooted much  
> >> more often of course...Lol
> >>
> >> I would hate to have to reboot back and forth in
> and out of Mac OS  
> >> just to run a Sim.  I may...but would prefer
> to have something  
> >> that runs native to the Mac.
> >>
> >> Mark Atwood
> >> Paragon Consulting, Inc.  |  President
> >> 5885 Landerbrook Drive Suite 130, Cleveland Ohio,
> 44124
> >> Phone: 440.684.3101 x102  |  Fax:
> 440.684.3102
> >> mark.atwood at paragon-inc.com 
> |  www.paragon-inc.com
> >>
> >>
> >> -----Original Message-----
> >> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca- 
> >> discussion-bounces at lists.nsrca.org]
> On Behalf Of James Oddino
> >> Sent: Sunday, January 31, 2010 4:31 PM
> >> To: General pattern discussion
> >> Subject: Re: [NSRCA-discussion] Lets fly--- Now!
> >>
> >> It's funny but I have the same reaction to running
> Windows apps on  
> >> my iMac.  In reality, if you boot up in
> Windows the iMac works as  
> >> good or better and is no more of a pain than any
> other machine  
> >> running Windows.  XP that is, I haven't tried
> Vista or 7.
> >
> >>
> >> Jim
> >>
> >>
> >>
> >>
> >> On Jan 31, 2010, at 9:50 AM, Atwood, Mark wrote:
> >>
> >>> Neither VMware Fusion, nor parallels provide
> direct access to the  
> >>> graphics processor.
> >>>
> >>> Bootcamp running XP Sp 2 works but that's a
> pain.
> >>> --------------------------
> >>> Sent from my BlackBerry Wireless Handheld
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: nsrca-discussion-bounces at lists.nsrca.org
> <nsrca-discussion- 
> >>> bounces at lists.nsrca.org>
> >>> To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
> >>> Sent: Sun Jan 31 12:36:04 2010
> >>> Subject: Re: [NSRCA-discussion] Lets fly---
> Now!
> >>>
> >>> VM ware or parallels...
> >>>
> >>> -----Original Message-----
> >>> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca- 
> >>> discussion-bounces at lists.nsrca.org]
> On Behalf Of Atwood, Mark
> >>> Sent: Sunday, January 31, 2010 12:29 PM
> >>> To: 'nsrca-discussion at lists.nsrca.org'
> >>> Subject: Re: [NSRCA-discussion] Lets fly---
> Now!
> >>>
> >>> Now if only somebody would make one that runs
> on a Mac ...
> >>> --------------------------
> >>> Sent from my BlackBerry Wireless Handheld
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: nsrca-discussion-bounces at lists.nsrca.org
> <nsrca-discussion- 
> >>> bounces at lists.nsrca.org>
> >>> To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
> >>> Sent: Sun Jan 31 12:26:06 2010
> >>> Subject: Re: [NSRCA-discussion] Lets fly---
> Now!
> >>>
> >>> http://www.redrockethobbies.com/ 
> >>>
> Phoenix_R_C_Pro_Flight_Simulator_2_5_p/rtm2500.htm
> >>> $124 w free shipping if you apply an online
> coupon. Seems like  
> >>> they all on BO but saying it will be in this
> week. I'm in.
> >>> Mark they have Airtronics adaptors but I'm not
> sure they work  
> >>> with the new radio. I have old JR stuff for
> the transmitter. Mike
> >>>
> >>> --- On Sun, 1/31/10, Phil Spelt <chuenkan at comcast.net>
> wrote:
> >>>
> >>>> From: Phil Spelt <chuenkan at comcast.net>
> >>>> Subject: Re: [NSRCA-discussion] Lets
> fly--- Now!
> >>>> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> >>>> Date: Sunday, January 31, 2010, 10:17 AM
> >>>>
> >>>>
> >>>> The timing is great -- I am considering a
> >>>> move from
> >>>> RealFlite 3 to a newer RC sim.  What
> does Phoenix
> >>>> offer that RF 5
> >>>> does not, and vice-versa???
> >>>>
> >>>>
> >>>> At 11:12 AM 1/31/2010, you wrote:
> >>>>
> >>>> Me too.
> >>>> It is too cold to
> >>>> fly here and I am missing some
> flying.....
> >>>>
> >>>>
> >>>> Vicente "Vince" Bortone
> >>>>
> >>>>
> >>>> ----- Original Message -----
> >>>>
> >>>> From: "Mark Atwood"
> >>>> <atwoodm at paragon-inc.com>
> >>>>
> >>>> To: "nsrca-discussion at lists.nsrca.org"
> >>>> <nsrca-discussion at lists.nsrca.org>
> >>>>
> >>>> Sent: Sunday, January 31, 2010 10:07:40 AM
> GMT -06:00
> >>>> US/Canada
> >>>> Central
> >>>>
> >>>> Subject: Re: [NSRCA-discussion] Lets
> fly--- Now!
> >>>>
> >>>>
> >>>> How much is the phoenix software?? 
> This is really
> >>>> intriguing.
> >>>> I'd be interested in feedback from those
> that are
> >>>> participating.
> >>>>
> >>>>
> >>>>
> >>>> -mark
> >>>>
> >>>> --------------------------
> >>>>
> >>>> Sent from my BlackBerry Wireless Handheld
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> ----- Original Message -----
> >>>>
> >>>> From: nsrca-discussion-bounces at lists.nsrca.org
> >>>> <nsrca-discussion-bounces at lists.nsrca.org>
> >>>>
> >>>> To: nsrca-discussion at lists.nsrca.org
> >>>> <nsrca-discussion at lists.nsrca.org>
> >>>>
> >>>> Sent: Sun Jan 31 10:57:18 2010
> >>>>
> >>>> Subject: Re: [NSRCA-discussion] Lets
> fly--- Now!
> >>>>
> >>>>
> >>>> This is really exciting; a new
> approach.   I did
> >>>> some more
> >>>> checking and it looks like there is a
> voice chat (although
> >>>> I don't have a
> >>>> recording device on this computer). 
> There is, however
> >>>> a chat
> >>>> capability which is really cool. 
> That way we can
> >>>> communicate with
> >>>> each other and other pilots that want to
> >>>> join.
> >>>> Lets try this out again-  can take
> turns flying and
> >>>> critiquing and
> >>>> see how it works.
> >>>>
> >>>> Lets shoot for another flying session at 7
> PM  (east
> >>>> coast time)
> >>>> tonight (Sunday, 31 January).  For
> those who have a
> >>>> Phoenix flight
> >>>> simulator and want to join, lets go for
> it.  I set up
> >>>> a
> >>>> "Pattern Flying" session using the Moscow,
> Italy
> >>>> flying
> >>>> site.
> >>>>
> >>>>
> >>>>
> >>>> Don
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> -----Original Message-----
> >>>>
> >>>> From: Stuart Chale <schale at optonline.net>
> >>>>
> >>>> To: General pattern discussion
> >>>> <nsrca-discussion at lists.nsrca.org>
> >>>>
> >>>> Sent: Sat, Jan 30, 2010 8:01 pm
> >>>>
> >>>> Subject: Re: [NSRCA-discussion] Lets
> fly--- Now!
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> Agree I would try but don't have Phoenix
> either.
> >>>>
> >>>> Stuart
> >>>>
> >>>>
> >>>> Pete Cosky wrote:
> >>>>
> >>>>
> >>>>       Neat
> idea….too
> >>>> bbad I don’t
> >>>> have Phoenix.
> >>>>
> >>>>
> >>>>
> >>>>       From:
> >>>> nsrca-discussion-bounces at lists.nsrca.org
> >>>> [
> >>>> mailto:nsrca-discussion-bounces at lists.nsrca.org]
> On
> >>>> Behalf Of
> >>>> tocdon at netscape.net
> >>>>
> >>>>       Sent:
> Saturday,
> >>>> January 30,
> >>>> 2010 7:29 PM
> >>>>
> >>>>       To:
> >>>> nsrca-discussion at lists.nsrca.org
> >>>>
> >>>>       Subject:
> >>>> [NSRCA-discussion]
> >>>> Lets fly--- Now!
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>       Hey guys.
> 7:19
> >>>> PM East Coast
> >>>> time and its snowing.  Who wants to
> get some
> >>>> practice.  Join me
> >>>> for some on-line simulator practice.
> >>>>
> >>>>
> >>>>
> >>>>       From the
> Phoenix
> >>>> RC simulator,
> >>>> go to multiplayer under pull down
> menu.  Select GO
> >>>> Online, Fill in
> >>>> the Online Sign in (put a name I can
> recognize) and hit
> >>>> "sign
> >>>> in" select Connecticut Flying.  Hit
> "Join
> >>>> Session"
> >>>>
> >>>>
> >>>>
> >>>>       Joseph is
> >>>> buzzing around, but
> >>>> we'll move to pattern flying if anyone is
> interested
> >>>> this evening.
> >>>> If there is interest we can do coaching
> sessions or an
> >>>> on-line, live
> >>>> pattern contest.  What do you think?
> >>>>
> >>>>
> >>>>
> >>>>       Regards,
> >>>>
> >>>>       Don
> >>>>
> >>>>
> >>>> ________________________________
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> _______________________________________________
> >>>>
> >>>>   
>    NSRCA-discussion
> >>>> mailing
> >>>> list
> >>>>
> >>>>
> >>>> NSRCA-discussion at lists.nsrca.org
> >>>>
> >>>>
> >>>>
> >>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> _______________________________________________
> >>>>
> >>>> NSRCA-discussion mailing list
> >>>>
> >>>> NSRCA-discussion at lists.nsrca.org
> >>>>
> >>>>
> >>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>>>
> >>>>
> >>>>
> _______________________________________________
> >>>>
> >>>> NSRCA-discussion mailing list
> >>>>
> >>>> NSRCA-discussion at lists.nsrca.org
> >>>>
> >>>>
> >>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>>>
> >>>>
> _______________________________________________
> >>>>
> >>>> NSRCA-discussion mailing list
> >>>>
> >>>> NSRCA-discussion at lists.nsrca.org
> >>>>
> >>>>
> >>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>>>
> >>>> -->
> >>>> There are only two types of aircraft --
> fighters and
> >>>> targets.
> >>>>
> >>>>
> >>>> Phil Spelt, Past President,
> >>>> Knox County Radio
> >>>> Control Society, Inc.
> >>>>
> >>>>      URL:
> >>>>
> >>>> http://www.kcrctn.com
> >>>>
> >>>> AMA--1294,  Scientific Leader Member,
> SPA--177
> >>>>
> >>>>     My URL:
> >>>>
> >>>> http://mywebpages.comcast.net/~chuenkan/
> >>>>
> >>>>     (865) 435-1476 v
> >>>> (865) 604-0541
> >>>> c
> >>>>
> >>>>
> >>>> -----Inline Attachment Follows-----
> >>>>
> >>>>
> _______________________________________________
> >>>> NSRCA-discussion mailing list
> >>>> NSRCA-discussion at lists.nsrca.org
> >>>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>>
> >>>
> >>>
> >>>
> _______________________________________________
> >>> NSRCA-discussion mailing list
> >>> NSRCA-discussion at lists.nsrca.org
> >>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>>
> _______________________________________________
> >>> NSRCA-discussion mailing list
> >>> NSRCA-discussion at lists.nsrca.org
> >>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>>
> >>>
> >>>
> _______________________________________________
> >>> NSRCA-discussion mailing list
> >>> NSRCA-discussion at lists.nsrca.org
> >>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>>
> _______________________________________________
> >>> NSRCA-discussion mailing list
> >>> NSRCA-discussion at lists.nsrca.org
> >>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >>
> >> _______________________________________________
> >> NSRCA-discussion mailing list
> >> NSRCA-discussion at lists.nsrca.org
> >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >> _______________________________________________
> >> NSRCA-discussion mailing list
> >> NSRCA-discussion at lists.nsrca.org
> >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>

More information about the NSRCA-discussion mailing list