[NSRCA-discussion] Pattern Plane Stand

[Dennis Bodary]

Andrew i bought a couple of those jl ones also. they work pretty good. the fuselage part is pretty wide for a pattern plane but it still works well. would advise putting some foam where the spinner contacts the stand otherwise the spinner is directly on the metal ring. 
I swear one of the days i will make a new top part for it narrower for a pattern plane. But don't hold your breath.

--- On Wed, 4/28/10, Andrew Jesky <Andrew.Jesky at soaringsoftware.com> wrote:


From: Andrew Jesky <Andrew.Jesky at soaringsoftware.com>
Subject: Re: [NSRCA-discussion] Pattern Plane Stand
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Wednesday, April 28, 2010, 1:05 PM








John,
 
Thanks a bunch for the help, just ordered me a couple of them.
 
Mike, 
 
I appreciate the offer but I think I’ll just go with the stands for now.
 
Andrew
 


From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of John Gayer
Sent: 2010/04/28 12:36 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Pattern Plane Stand
 
Andrew,
I bought a couple after seeing them at Rusty's house. very useful.

http://www.jlproducts.net/ProductSkyPort.html

John Gayer

On 4/28/2010 10:13 AM, Andrew Jesky wrote: 
Looking to get a little help. A few months ago in the Kfactor Rusty Fried posted some info on an airplane stand he uses to hold his airplanes vertically. Does anyone have a link to where to get these? I cannot seem to find any info on these.
 
 
Thanks,
Andrew Jesky
     _______________________________________________NSRCA-discussion mailing listNSRCA-discussion at lists.nsrca.orghttp://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-----Inline Attachment Follows-----


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100429/4c1245cc/attachment.html>