[NSRCA-discussion] Pull - Pull cable

[J N Hiller]

I use .020" diameter SS U-control cable from SIG. Comes two on a roll about
60 feet each.
Jim

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Stuart Chale
Sent: Monday, April 26, 2010 6:33 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Pull - Pull cable

I have been using Berkely Steelon fishing leader for ever and never had a
failure.  30 pound test or so works fine.  It is a plastic coated steel wire
available at sporting goods stores or on line.  They also sell the right
size crimps.
Stuart

On 4/26/2010 9:26 AM, Anthony Romano wrote:

Is the CST aramid yarn appropriate? Do I want the denier 195 or the 1510?
Have been happy with the Sullivan stuff for rudders but don't have enough
left.

Anthony

> To: nsrca-discussion at lists.nsrca.org
<mailto:nsrca-discussion at lists.nsrca.org>
> Date: Sun, 25 Apr 2010 12:24:39 -0400
> From: rcmaster199 at aol.com <mailto:rcmaster199 at aol.com>
> Subject: Re: [NSRCA-discussion] Pushrod suggestions
>
> Anthony,
>
> You might consider pull-pull if the elevator can be set-up for it. You
> will save the most weight with such a set-up
>
> Matt
>
> -----Original Message-----
> From: Ed Alt <ed_alt at hotmail.com> <mailto:ed_alt at hotmail.com>
> To: nsrca-discussion at lists.nsrca.org
<mailto:nsrca-discussion at lists.nsrca.org>
> Sent: Sun, Apr 25, 2010 9:22 am
> Subject: Re: [NSRCA-discussion] Pushrod suggestions
>
> I think you should consider landing it first, as this will make things
> considerably easier.
>
> Probably the easiest system is the Lockhart pushrod setup.  I've got
> pictures...
>
> Ed
>
>
> From: Anthony Romano
> Sent: Sunday, April 25, 2010 10:20 AM
> To: nsrca-discussion at lists.nsrca.org
<mailto:nsrca-discussion at lists.nsrca.org>
> Subject: [NSRCA-discussion] Pushrod suggestions
>
>
>
>
> Hi  All,
>  I want to remove the servos from the tail of an already flying plane
> to move the cg forward. Thought I had a DEPS kit in stock but it was
> used in another project.
>  Please share your pushrod ideas, especially since this plane has a
> tail stiffener that will make installing the DEPS quite difficult.
> Pictures, links, etc would be greatly appreciated.
>
> Anthony
>
> The New Busy is not the old busy. Search, chat and e-mail from your
> inbox. Get started.
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion____________________
___________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
  _____

The New Busy is not the too busy. Combine all your e-mail accounts with
Hotmail. Get busy.
<http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28
326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4>


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100426/88e45dbf/attachment.html>