[NSRCA-discussion] stylus on 2.4 question

Anthony Abdullah aabdu at sbcglobal.net
Wed Apr 21 05:53:38 AKDT 2010


Tony,
I'll swap with you if you like. I have a FHSS-1 receiver but need the FHSS-3.

Let me know if you are interested. 

Anthony




________________________________
From: "Atwood, Mark" <atwoodm at paragon-inc.com>
To: General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Tue, April 20, 2010 6:24:37 PM
Subject: Re: [NSRCA-discussion] stylus on 2.4 question


Yup…that’s the problem.  Didn’t pay attention to the Rx you listed or I would have said that in the first place.  The Stylus module is only FHSS-1.
 
 
 
Mark Atwood
Paragon Consulting, Inc.  |  President
5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124 
Phone: 440.684.3101 x102  |  Fax: 440.684.3102
mark.atwood at paragon-inc.com  |  www.paragon-inc.com
 
From:nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tony
Sent: Tuesday, April 20, 2010 5:48 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] stylus on 2.4 question
 
I figured out that I have a FHSS 3 receiver and it has to be a FHSS-1 for the Stylus, so I have them ordered.  Thanks, Mark!
 
Tony Stillman, President
Radio South, Inc.
139 Altama Connector, Box 322
Brunswick, GA  31525
1-800-962-7802
www.radiosouthrc.com

________________________________

From:nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Atwood, Mark
Sent: Tuesday, April 20, 2010 5:11 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] stylus on 2.4 question
 
What modulation do you have the radio in?  I believe it needs to be PPM1
 
Mark Atwood
Paragon Consulting, Inc.  |  President
5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124 
Phone: 440.684.3101 x102  |  Fax: 440.684.3102
mark.atwood at paragon-inc.com  |  www.paragon-inc.com
 
From:nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tony
Sent: Tuesday, April 20, 2010 4:51 PM
To: 'General pattern discussion'
Subject: [NSRCA-discussion] stylus on 2.4 question
 
I just converted a Stylus to 2.4Ghz using the module and the 92104 receiver.  However, I can’t get it to bind.  Any ideas?
 
Tony Stillman, President
Radio South, Inc.
139 Altama Connector, Box 322
Brunswick, GA  31525
1-800-962-7802
www.radiosouthrc.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100421/cd4c80ec/attachment.html>


More information about the NSRCA-discussion mailing list