[NSRCA-discussion] stylus on 2.4 question

[Tony]

I figured out that I have a FHSS 3 receiver and it has to be a FHSS-1 for
the Stylus, so I have them ordered.  Thanks, Mark!

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Atwood, Mark
Sent: Tuesday, April 20, 2010 5:11 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] stylus on 2.4 question

 

What modulation do you have the radio in?  I believe it needs to be PPM1

 

Mark Atwood

Paragon Consulting, Inc.  |  President

5885 Landerbrook Drive Suite 130, Cleveland Ohio, 44124 

Phone: 440.684.3101 x102  |  Fax: 440.684.3102

mark.atwood at paragon-inc.com  |  www.paragon-inc.com
<http://www.paragon-inc.com/> 

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tony
Sent: Tuesday, April 20, 2010 4:51 PM
To: 'General pattern discussion'
Subject: [NSRCA-discussion] stylus on 2.4 question

 

I just converted a Stylus to 2.4Ghz using the module and the 92104 receiver.
However, I can't get it to bind.  Any ideas?

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100420/296a7d7c/attachment.html>