[NSRCA-discussion] Composite Firewalls

[Keith Hoard]

I have a 12" sq. sheet of CST's end grain / carbon.  It was half the weight
of the same thickness plywood firewall. . . You gotta roll down the page a
ways to find it. .

http://www.cstsales.com/carbon_sandwich_panel.html

On Tue, Apr 13, 2010 at 9:15 AM, Duane Beck <duane.e.beck at comcast.net>wrote:

> ACP is one source.
> http://www.acp-composites.com/home.php?cat=4708
>
> However, I recall the consensus earlier was that balsa skinned both sides
> with 1/32" ply (primary grain perpendicular to the balsa) was sufficient for
> firewalls.
>
> Duane
>
> > From: "colin chariandy" <cchariandy at yahoo.ca>
> > To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
> > Sent: Tuesday, April 13, 2010 9:57:28 AM GMT -05:00 US/Canada Eastern
> > Subject: [NSRCA-discussion] Composite Firewalls
> >
> > Can anyone advise me on the appropriate composite panel size and
> > material for Glow powered firewalls? My Xigris came with 1/8 ply that
> > I'd like to replace.
> >
> > Colin.
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion




-- 

Keith Hoard
Collierville, TN
khoard at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100413/7885db47/attachment.html>