[NSRCA-discussion] Rudder servo arm

[AtwoodDon at aol.com]

Well, I guess so, they go all the way from one end of the arm to the other  
end.......  
 
Seriously, they should be long enough, I am using one and actually went in  
one hole on each end.
 
Don
 
 
In a message dated 4/5/2010 4:03:54 P.M. Pacific Daylight Time,  
derekkoopowitz at gmail.com writes:

Are they  long enough?

On Mon, Apr 5, 2010 at 3:33 PM, JShup <_jshulman at cfl.rr.com_ 
(mailto:jshulman at cfl.rr.com) >  wrote:

Dubro HD arm. Not 'cool' like other stuff, but works  great.

JASiP  


On Apr 5, 2010, at 6:18 PM, Derek Koopowitz <_derekkoopowitz at gmail.com_ 
(mailto:derekkoopowitz at gmail.com) > wrote:



Does anyone have a preference as to which servo arm one  should use to 
enhance the throw for rudder?  I've seen different  types - some that are made 
out of PCB material and bolted/screwed to a  round servo wheel so that the 
arm is about 2" - 2 1/2" long... I've also  seen the metal ones that replace 
the servo wheel/arm that comes with the  servo.

BTW, these need to be for Futaba... and should weigh as  little as  
possible.

_______________________________________________
NSRCA-discussion  mailing list
_NSRCA-discussion at lists.nsrca.org_ 
(mailto:NSRCA-discussion at lists.nsrca.org) 
_http://lists.nsrca.org/mailman/listinfo/nsrca-discussion_ 
(http://lists.nsrca.org/mailman/listinfo/nsrca-discussion) 

_______________________________________________
NSRCA-discussion  mailing list
_NSRCA-discussion at lists.nsrca.org_ 
(mailto:NSRCA-discussion at lists.nsrca.org) 
_http://lists.nsrca.org/mailman/listinfo/nsrca-discussion_ 
(http://lists.nsrca.org/mailman/listinfo/nsrca-discussion) 





_______________________________________________
NSRCA-discussion  mailing  list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20100405/51c57cae/attachment.html>