[NSRCA-discussion] OS-160 pipe tune length

[J N Hiller]

Thanks. Quite a variation! Nothing is simple. I'll set it up a test bench and see how it acts.
Jim
 
-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Vicente "Vince" Bortone
Sent: Wednesday, October 14, 2009 4:07 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] OS-160 pipe tune length
 
Check here:
 
http://www.rcpattern.com/2cycle.htm#C
 
Good luck,

Vicente "Vince" Bortone

----- Original Message -----
From: "J N Hiller" <jnhiller at earthlink.net>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, October 14, 2009 3:59:44 PM GMT -06:00 US/Canada Central
Subject: [NSRCA-discussion] OS-160 pipe tune length

Hello all. Can someone give me an approximate tuned pipe tune length
measured to the high point of the pipe, for an OS-160 and 18" prop. I would
like to get a starting point before cutting the header or extension pipe.
Thanks
Jim Hiller

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091015/9dae826e/attachment.html>