[NSRCA-discussion] OS 1.60 - muffler recommendations?

[Pascoe,Tim [Burlington]]

I'd have to measure again to be exact, but I know with my Aeroslave
pipe, I was looking at it being about 5-6 inches too long. Of course,
that would also require a wrap-around header, and I'm not sure where to
source that these days (although the UK Genesis pipes supply one).

 

Tim



________________________________

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of colin
chariandy
Sent: Friday, October 09, 2009 12:58 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] OS 1.60 - muffler recommendations?

 

Tim, I have a Bolly muffler that can be used. How much tunnel space do
you have?

--- On Fri, 10/9/09, Pascoe,Tim [Burlington] <Tim.Pascoe at ec.gc.ca>
wrote:


From: Pascoe,Tim [Burlington] <Tim.Pascoe at ec.gc.ca>
Subject: Re: [NSRCA-discussion] OS 1.60 - muffler recommendations?
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Received: Friday, October 9, 2009, 10:46 AM

Only problem - I didn't get it with the engine. It was originally
purchased without one, and I bought the engine used. I guess I could buy
one, but I figured if I need to buy something anyway, then perhaps there
was something better.

 

Thanks however - I had wondered if the stock muffler was an option.

 

Anyone have a stock OS1.60 muffler collecting dust?

 

Tim

________________________________

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of michael s
harrison
Sent: Friday, October 09, 2009 10:34 AM
To: ' General pattern discussion '
Subject: Re: [NSRCA-discussion] OS 1.60 - muffler recommendations?

 

Tim,

The stock OS muffler although bulky, works very well.

Mike

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
Pascoe,Tim [ Burlington ]
Sent: Friday, October 09, 2009 9:12 AM
To: General pattern discussion
Subject: [NSRCA-discussion] OS 1.60 - muffler recommendations?

 

I have an OS 1.60 which I'm planning on putting into a practice plane. I
don't want to put a full 2C pipe on it, and in fact don't have the
length in the existing tunnel to do it. The engine came with a Bisson
Pitts style muffler (bought used with 10 flights on it), but I'm not
thrilled with the sound of those kinds of mufflers either.

 

So - suggestions would be appreciated. I've had one person suggest that
I use a 4C pipe, but I'm not sure if that would provide enough volume?
If it would, then problem solved since I can get an older Hatori pipe no
problem.

 

Thanks,

 

Tim Pascoe


-----Inline Attachment Follows-----

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
<http://ca.mc1126.mail.yahoo.com/mc/compose?to=NSRCA-discussion@lists.ns
rca.org> 
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
<http://lists.nsrca.org/mailman/listinfo/nsrca-discussion> 

 

________________________________

The new Internet Explorer(r) 8 - Faster, safer, easier. Optimized for
Yahoo! Get it Now for Free!
<http://downloads.yahoo.com/ca/internetexplorer/> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091009/092737fe/attachment.html>