[NSRCA-discussion] Emailing: Omega

ronlock at comcast.net ronlock at comcast.net
Thu Nov 12 05:27:46 AKST 2009



Snap and a half at top of box, from knife - Lets use that right after we get a handle on judging more visible snaps.  <G>      Other than that, I'd call it a candidate for the Sequence Group. 



Ron Lockhart. 


----- Original Message ----- 
From: "Don Ramsey" <don.ramsey at suddenlink.net> 
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org> 
Sent: Thursday, November 12, 2009 8:06:19 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [NSRCA-discussion] Emailing: Omega 




I think it would be a good maneuver without the snap at the top.   The F3A Knife Edge Loop is a K-5 maneuver and this is a half knife edge loop with other difficulty added.   





From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Don Ramsey 
Sent: Thursday, November 12, 2009 7:00 AM 
To: 'General pattern discussion' 
Subject: Re: [NSRCA-discussion] Emailing: Omega 



Looks like a light bulb. 





From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of J N Hiller 
Sent: Wednesday, November 11, 2009 6:15 PM 
To: General pattern discussion 
Subject: Re: [NSRCA-discussion] Emailing: Omega 



George if it is to be flown with equal radiuses it looks considerably different than the attached drawing. An equal R drawing is attached here. 

In any case it would be interesting to fly. 

Jim Hiller 



-----Original Message----- 
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of GEORGE KENNIE 
Sent: Wednesday, November 11, 2009 3:22 PM 
To: General pattern discussion 
Subject: [NSRCA-discussion] Emailing: Omega 





I've been thinking about this maneuver for quite a long time and thought I'd pass it along for consideration by the Sequence Proposal guys. 



It's meant to be a Masters level maneuver and while it contains no integrated rolling elements it has some challenging elements. It's a center 

maneuver like an M and requires a deft hand to present with symmetry and grace while still being a "safe type" execution maneuver, in that it's a 

looping maneuver performed AWAY from ground level from an upright position with an upright exit, so the pucker factor is minimized. 



It's called an Omega, which should be easily understood by it's apparent shape. Here's how it goes.  See what you think : 





We're approaching center flying from left to right. At a point before center, a distance equal to 1/4 the radius of the loop, the model pulls through 

a radius of 135 degrees to a 45 degree up line and immediately pushes into the arc of an outside loop which is flown to the nine O'Clock position 

where the model performs a 1/4 roll to knife edge and continues the radius of the loop to the 12 O'Clock position where the model performs a One 

and one-half snap and continuing the loop radius to the 3 O'Clock position where the model once again performs a 1/4 roll and immediately pushes 

to complete the remaining looping segment and completing the maneuver by pulling through a 135 degree radius to exit in upright level flight. 



There's nothing really hard here guys, but the maneuver does demand respectable concentration. Think of it as a strangely entered loop with a knife- 

edge loop across the top 180 degrees with a snap and a half avalanche at the top. Roll and snap direction are pilot's option. 



Don't be too quick to discount it. I've only done it on the Sim, but if I can do it, it should be cake for the Masters guys. 



G. 









































































































































The message is ready to be sent with the following file or link attachments: 
Omega 

Note: To protect against computer viruses, e-mail programs may prevent sending or receiving certain types of file attachments.  Check your e-mail security settings to determine how attachments are handled. 

No virus found in this incoming message. 
Checked by AVG - www.avg.com 
Version: 8.5.425 / Virus Database: 270.14.58/2493 - Release Date: 11/11/09 19:41:00 

No virus found in this incoming message. 
Checked by AVG - www.avg.com 
Version: 8.5.425 / Virus Database: 270.14.58/2493 - Release Date: 11/11/09 19:41:00 
_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091112/5da90980/attachment.html>


More information about the NSRCA-discussion mailing list