[NSRCA-discussion] Fataba 14 MZ
Derek Koopowitz
derekkoopowitz at gmail.com
Mon Nov 2 10:10:34 AKST 2009
Verne,
I did not use the device that was shown in the link - I used a similar
device starting early this year and after about 5 months of use I picked up
my TX to clip the TX strap onto the device and the entire device pulled the
TX clip attachment and bolt from the TX case. Any device which changes the
angle of attachment will put a strain on the TX attachment clip and I am
sure that it will fail at some point.
I had to have a brand new face plate put on my 14MZ... thanks to Hobbico for
getting it done quickly.
-Derek
On Mon, Nov 2, 2009 at 10:58 AM, <verne at twmi.rr.com> wrote:
> Hi Mike,
> Sounds like your warning is coming from experience. Care to elaborate? I've
> been using mine for over a season without a problem, but it would be handy
> to know what to avoid if there's a problem.
>
> Thanks!
> Verne
>
>
> ---- Dr Mike <drmikedds at sbcglobal.net> wrote:
>
> =============
> Be careful in using it. It will break your tx casing if abused.
>
> mike
>
>
>
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Verne
> Koester
> Sent: Sunday, November 01, 2009 7:19 PM
> To: 'General pattern discussion'
> Subject: Re: [NSRCA-discussion] Fataba 14 MZ
>
>
>
> Hi Jerry,
>
> Here's the link for what you need, I've been using it for over a year and
> it
> works great - perfect balance.
>
>
>
> http://www.helicopterjohn.com/
>
>
>
> Verne
>
>
>
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Gerald
> Gallagher
> Sent: Sunday, November 01, 2009 7:32 PM
> To: 'General pattern discussion'
> Subject: [NSRCA-discussion] Fataba 14 MZ
>
>
>
> Has anyone made or found a manufactured devise that will fit on the
> Fataba
> 14 MZ that will improve the balance, (CG) better when using the 2.4
> antenna?
>
> Thanks
>
>
>
> Jerry Gallagher
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20091102/9b330b62/attachment.html>
More information about the NSRCA-discussion
mailing list