[NSRCA-discussion] Futaba 12 FG question

[Ron Van Putte]

Sorry, wrong interpretation.  The transmitter is turned on, then the  
receiver.

Ron

On May 6, 2009, at 4:15 PM, Bob Richards wrote:

> I think you guys are on the wrong track.
>
> The problem (as I read it) is that the rx is already on, but when  
> he turns the TRANSMITTER on, there is a delay before the rx responds.
>
> All the replies I have read thus far (I think) refer to the delay  
> when you turn the RECEIVER on. I can see how a regulator might  
> cause a delay when you turn the receiver on, but it should have  
> nothing to do with a delay when you turn the transmitter on.
>
> The only thing I can think of regarding the transmitter turn-on  
> delay would have to do with possible software version in the  
> transmitter, or possibly whether or not there are other 2.4g  
> transmitters on when you turn on YOUR transmitter (the receiver  
> might be trying to sample the others looking for the right one).
>
> Bob R.
>
>
> --- On Tue, 5/5/09, Ron Van Putte <vanputte at cox.net> wrote:
>
> From: Ron Van Putte <vanputte at cox.net>
> Subject: Re: [NSRCA-discussion] Futaba 12 FG question
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Date: Tuesday, May 5, 2009, 11:01 PM
>
> Regulators!  Mine is a Jaccio as well.  I don't know what John uses.
>
> Ron
>
> On May 5, 2009, at 8:49 PM, Archie Stafford wrote:
>
> > I noticed this when I was running different brand regulators.  My
> > planes did
> > this when I was flying duralite regulators.  It even happens on a
> > friends
> > airplane as well as the airplane he bought from me.  My Tech Aero
> > regulators
> > do it as well.  However the plane I have with Jaccio stuff
> > doesn't.  I have
> > no explanation as to why, just something I have discovered.
> >
> > Arch
> >
> >
> > -----Original Message-----
> > From: nsrca-discussion-bounces at lists.nsrca.org
> > [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Ron
> > Van Putte
> > Sent: Tuesday, May 05, 2009 7:13 PM
> > To: General pattern discussion
> > Subject: Re: [NSRCA-discussion] Futaba 12 FG question
> >
> > I hope someone can help John out.  It's really bugging him.  When he
> > told me what his system is doing, I responded that my system's
> > response is instantaneous.  He didn't believe me and bet a beer that
> > my system was as slow as his.  He lost the beer and I think that  
> PO'd
> > him as much as anything.
> >
> > Ron
> >
> > On May 5, 2009, at 7:04 PM, John Fuqua wrote:
> >
> >> I have an interesting and perplexing thing going on with my 12 FGA
> >> Futaba 2.4ghz transmitter that is not duplicated by others here
> >> locally.  I thought I would throw it out to the list and see if
> >> anyone else has noticed this anomaly.
> >>
> >>
> >>
> >> When I turn on my 12FGA 2.4 TX it takes all my 2.4 ghz receivers (7
> >> ch, 8 ch, 14 ch) about 1 or 2 seconds before any control surfaces
> >> neutralize.   With Ron Van Putte's 12 FGA 2.4 and his 14 ch rx it
> >> is instantaneous.  We checked a 14MZ 2.4 tx with an 8 ch Rx and it
> >> is about the same as Ron's.
> >>
> >>
> >>
> >> Has anyone else using the 12 FGA noticed this.  This does not seem
> >> to affect performance but I am puzzled why I see this time
> >> differential to neutralize.
> >>
> >>
> >>
> >> John
> >>
> >>
> >>
> >> _______________________________________________
> >> NSRCA-discussion mailing list
> >> NSRCA-discussion at lists.nsrca.org
> >> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion