[NSRCA-discussion] Servos suggestions for a 90 size pattern plane

[mike mueller]

 Thanks Tommy I will head your warning and be careful. I tend to push the limits and hopefully it won't come back to bite me in the posterior.Mike
 By the way the Helios 63E is a great looking plane. In saw the pictures of it on RCU. Where did you get yours? Mike

--- On Fri, 6/12/09, Tommy Scarmardo <tretas513 at yahoo.com> wrote:

> From: Tommy Scarmardo <tretas513 at yahoo.com>
> Subject: Re: [NSRCA-discussion] Servos suggestions for a 90 size pattern plane
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Date: Friday, June 12, 2009, 1:21 PM
> Mike, 
> On my Helios 63e practice pattern ship I have
> 3421sa's on ailerons that have both been
> retrofitted with metal gears after losing gear teeth during
> normal pattern maneuvers. I
> like these servos very much but I'm just
> saying be careful.
>  
> tommy s
> 
> --- On Fri, 6/12/09, mike mueller
> <mups1953 at yahoo.com> wrote:
> 
> 
> From: mike mueller <mups1953 at yahoo.com>
> Subject: Re: [NSRCA-discussion] Servos suggestions for a 90
> size pattern plane
> To: "General pattern discussion"
> <nsrca-discussion at lists.nsrca.org>
> Date: Friday, June 12, 2009, 9:24 AM
> 
> 
> 
> Tommy I worried about the 3421's until I looked at the
> size servo's that QQ was running on his Euphoria. He
> runs dual ailerons on 1 small servo. I'm running 3421
> metals on my ailerons on my new Sickle so far so good. It
> was because of weight and also because I really think an E.
> plane can get away with less servo. I run it on a 6volt
> regulated 2 cell lipo. I think everyone is in to the
> security that overkill allows and that's great if your
> not worried about the weight. Mike
> 
> --- On Fri, 6/12/09, Tommy Scarmardo <tretas513 at yahoo.com>
> wrote:
> 
> > From: Tommy Scarmardo <tretas513 at yahoo.com>
> > Subject: Re: [NSRCA-discussion] Servos suggestions for
> a 90 size pattern
>  plane
> > To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> > Date: Friday, June 12, 2009, 9:13 AM
> > The 3421sa's are great little
> > servos, I have two on elevator on my new ship, but
> you
> > should be careful where you use them. The motor is
> > stronger than the nylon gear
> > train and is easily stripped under certain
> conditions.
> > The gears are tiny.
> >  
> > tommy s
> > 
> > --- On Fri, 6/12/09, mike mueller
> > <mups1953 at yahoo.com>
> wrote:
> > 
> > 
> > From: mike mueller <mups1953 at yahoo.com>
> > Subject: Re: [NSRCA-discussion] Servos suggestions for
> a 90
> > size pattern plane
> > To: "General pattern discussion"
> > <nsrca-discussion at lists.nsrca.org>
> > Date: Friday, June 12, 2009, 7:47 AM
> > 
> > 
> > 
> > How about JR 3421SA on everything but the rudder
> which
> > would work well with a JR 8321. Mike
> > 
> > --- On Fri, 6/12/09, Dean & Melissa Williams
> <DMWILLIAMS at bigpond.com>
> > wrote:
> > 
> > > From: Dean & Melissa Williams <DMWILLIAMS at bigpond.com>
> > > Subject: [NSRCA-discussion] Servos suggestions
> for a
> > 90 size pattern plane
> > > To: nsrca-discussion at lists.nsrca.org
> > > Date: Friday, June 12, 2009, 7:40 AM
> > > 
> > > 
> > >  
> > >  
> > > 
> > > 
> > >  
> > > Hi
> > > Which servos
> >  (brand and #)
> > > would you use for a 90 
> > > size pattern plane like the ESM Adrenaline 90
> and
> > which
> > > ones on what surfaces 
> > > ?
> > > Thanking you for your
> > > sugestions
> > >
> >
> 
>                                               
> > > 
> > > Dean (Outback OZ) 
> > > 
> > > -----Inline Attachment Follows-----
> > > 
> > > _______________________________________________
> > > NSRCA-discussion mailing list
> > > NSRCA-discussion at lists.nsrca.org
> > > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> > 
> > 
> >       
> > _______________________________________________
> >
>  NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> > 
> > 
> > 
> >       
> > -----Inline Attachment Follows-----
> > 
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> > http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
>      
>  
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> 
> 
>       
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion