[NSRCA-discussion] Arming plug manufacturer and source?

[Verne Koester]

I switched to 5.5 mm bullets last year and like them a lot. They hold up to
the arcing a lot better than the Deans because the spark hits right on the
end of the bullet which isn't where the electrical connection is made. The
Deans connectors I ran the year before that were in pretty bad shape from
the arcing.

Verne

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of mike mueller
Sent: Thursday, June 11, 2009 11:18 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Arming plug manufacturer and source?


 Anthony I think a lot of guys are getting away from the deans style
connectors. I know I've just switched everything over to 6MM connectors.
Anyone have any thoughts on that? Mike

--- On Thu, 6/11/09, Anthony Abdullah <aabdu at sbcglobal.net> wrote:

> From: Anthony Abdullah <aabdu at sbcglobal.net>
> Subject: [NSRCA-discussion] Arming plug manufacturer and source?
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Date: Thursday, June 11, 2009, 10:10 AM
> I
> bought an electric arming assembly in Toldeo and I find
> myself in need of another, does anyone know who makes it and
> where I can get it? It is basically a set of wires where one
> end goes to the ESC and the other to the battery with a
> mount to the inside of the fuselage. To arm the plane you
> insert the plug.
>  
> Thanks
> Anthony
> 
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


      
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion