[NSRCA-discussion] Arming plug manufacturer and source?

[Anthony Abdullah]

Great info guys!!! the list comes through again.
 
Thanks
Anthony

--- On Thu, 6/11/09, Bill's Email <wemodels at cox.net> wrote:


From: Bill's Email <wemodels at cox.net>
Subject: Re: [NSRCA-discussion] Arming plug manufacturer and source?
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Thursday, June 11, 2009, 11:32 AM


Here's what I'm using. Very cool device.

http://shop.rc-electronic.com/e-vendo.php?shop=k_emcotec_e&SessionId=&a=article&ProdNr=A72005&t=11&c=764&p=764

I get them here:

http://www.hkm-models.com/Emcotec.html

I also use this for my radio switch:

http://shop.rc-electronic.com/e-vendo.php?shop=k_emcotec_e&SessionId=&a=article&ProdNr=A11050&t=6&c=541&p=541

They make a single battery version as well:
http://shop.rc-electronic.com/e-vendo.php?shop=k_emcotec_e&SessionId=&a=article&ProdNr=A11060&t=6&c=541&p=541

I run dual 2S 730 mAh lipos. Call me old school. But I have a very light plane so I am not overly concerned about weight. But in any case, these products are worth the weight






_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090611/b61fa171/attachment.html>