[NSRCA-discussion] Great Planes spinner

[J Shu]

Since we're on the topic of the nose radius required... how does the 'motor in the nose' meet that requirement with a big gaping hole in the front?

Regards,
Jason
www.shulmanaviation.com
www.composite-arf.com

  ----- Original Message ----- 
  From: Michael Wickizer 
  To: NSRCA Mailing List 
  Sent: Wednesday, June 03, 2009 11:58 AM
  Subject: [NSRCA-discussion] Great Planes spinner


  I've looked at these before and in fact have used them on electric setups and have seen others use them on glow setups.
   
  My question / concern was that the nose was too pointed and didn't meet the minimum radius required.  It is very possible I don't really understand the rule or how to measure it.
   
  Any thoughts?



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090603/71d3b0d7/attachment.html>