[NSRCA-discussion] YS Problem

Tue Jun 2 21:13:00 AKDT 2009

Hi Archie,

The brand I believe you are looking for is "TY-1". They are readily available down here, lots of guys use them.

Tom

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Archie Stafford
Sent: Wednesday, 3 June 2009 1:54 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] YS Problem

Which of the plastic spinners are some of the Japanese and others running?  I see it has an aluminum backplate, but definitely has a plastic front.  I have one of the Great Planes with the aluminum backplate that I'm going to try.  With the CDI, I don't mind it because it starts so easily.

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Archie Stafford
Sent: Tuesday, June 02, 2009 10:32 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] YS Problem

Nope, bolt was gone.  I thought it might have broken also, but it didn't.  I guess it just loosened up over time.  I used to make it a point to check it periodically, but got out of the habit...

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Jon Lowe
Sent: Tuesday, June 02, 2009 10:24 PM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] YS Problem

I had a bolt break in two, no kick, and I had the same thing happen.
Was the end of your bolt still in the adapter?  I now change bolts
semi-frequently.  Of course it had to happen in the middle of a judged
round, Jason Shulman was judging and saw it, so I zeroed the round from
that point on.

Jon Lowe

-----Original Message-----
From: Archie Stafford <astafford at swtexas.net>
To: 'General pattern discussion' <nsrca-discussion at lists.nsrca.org>
Sent: Tue, 2 Jun 2009 10:08 pm
Subject: Re: [NSRCA-discussion] YS Problem

That's OK..I lost an almost brand new spinner tonight.  Didn't
have a YS kick to do it..I guess the bolt wasn't as tight as I
thought...just the
cone came off...3 week old anodized Tru Turn....grrr....

From:
nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]
On Behalf Of Atwood, Mark

Sent: Tuesday, June 02, 2009 10:05 PM

To: General pattern discussion

Subject: Re: [NSRCA-discussion] YS Problem

I'll read the link...

Sounds good!  You missed a beautiful night to fly.  So
did I L

From: nsrca-discussion-bounces at lists.nsrca.org0D
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Anthony
Abdullah

Sent: Tuesday, June 02, 2009 10:56 PM

To: General pattern discussion

Subject: Re: [NSRCA-discussion] YS Problem

None taken :o)

I hope like hell I'm wrong!!!

Attached is a link to a thread in RCU titled
  "Injector coming out of head"

http://www.rcuniverse.com/forum/m_7197327/anchors_7210131/mpage_1/key_/anchor/tm.htm#7210131

Speaking of YS and fun, I am pulling a half the niter converting
   my Black Magic to electric... Hmmmmmm Let me tell you, it was NOT fun
trying
   to get the nose ring out, damn that thing was in there good. Other
than that
  it is going fairly well actually almost done staring at it.

  --- On Tue, 6/2/09, Atwood, Mark <atwoodm at paragon-inc.com>
  wrote:

  From: Atwood, Mark <atwoodm at paragon-inc.com>

  Subject: Re: [NSRCA-discussion] YS Problem

  To: "General pattern discussion"
  <nsrca-discussion at lists.nsrca.org>

  Date: Tuesday, June 2, 2009, 10:43 PM

In
  a word...  Crap!

Anyone
   else??  I'd
 like a second opinion!!!! (nothing personal Anthony but
your
  opinion ..well...sucks. lol)   I have a feeling you're correct
  though, much to my chagrin.  Not having a good YS moment.

From:
   nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]
  On Behalf Of Anthony Abdullah

  Sent: Tuesday, June 02, 2009 10:42 PM

  To: General pattern discussion

  Subject: Re: [NSRCA-discussion] YS Problem

Mark,

Bad news, you can not put that back in so it does not pup out again.
     From what I have read, that problem isn't really user serviceable.
I have
     read posts of guys pressing them back in and even some guys using
JB Weld
     to keep them in. Usually that is a problem that requires the engine
to go
    back to YS.

Sorry to hear that!

Anthony

    --- On Tue, 6/2/09, Atwood, Mark <atwoodm at paragon-inc.com>
    wrote:

    From: Atwood, Mark <atwoodm at paragon-inc.com>

    Subject: [NSRCA-discussion] YS Problem

    To: "General pattern discussion"
    <nsrca-discussion at lists.nsrca.org>

    Date: Tuesday, June 2, 2009, 10:16 PM

0D

The short version...    YS1.70DZ - the brass fitting on
     the TOP of the head (towards the back) that has the black check
valve
    pressed onto it blew out of the engine in flight!!  Needless to say
    the motor quit.

It appears to be a pressure fit.    I pressed it back
    in (I knew this wouldn't work, but what the heck), started the
    engine.  It idled great, ran up great, took off, and as soon as the
    motor warmed up (about two passes, pulled vertical and POP...dead as a
    rock.  Landed... and the fitting had popped out again.

So I have a few questions...

What caused this to pop out in the first place??

What do I do to put it back in SECURELY

HELP!!!!

-Mark

    -----Inline Attachment Follows-----

_______________________________________________

    NSRCA-discussion mailing list

    NSRCA-discussion at lists.nsrca.org

    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

No virus
  found in this incoming message.

  Checked by AVG - www.avg.com

   Version: 8.5.339 / Virus Database: 270.12.40/2135 - Release Date:
06/01/09
  17:
55:00

  -----Inline Attachment Follows-----

_______________________________________________

  NSRCA-discussion mailing list

  NSRCA-discussion at lists.nsrca.org

  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

No virus
found in this incoming message.

Checked by AVG - www.avg.com

Version: 8.5.339 / Virus Database: 270.12.40/2135 - Release Date:
06/01/09
17:55:00

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

************************************************************************
*PLEASE NOTE* This email and any attachments may
be confidential. If received in error, please delete all
copies and advise the sender. The reproduction or
dissemination of this email or its attachments is
prohibited without the consent of the sender.

WARNING RE VIRUSES: Our computer systems sweep
outgoing email to guard against viruses, but no warranty
is given that this email or its attachments are virus free.
Before opening or using attachments, please check for
viruses. Our liability is limited to the re-supply of any
affected attachments.

Any views expressed in this message are those of the
individual sender, except where the sender expressly,
and with authority, states them to be the views of the
organisation.
************************************************************************