[NSRCA-discussion] 6 ft balsa

[Lisa n Larry]

I e-mailed Jake at jake at specializedbalsa.com..

He was very quick to respond shortly after somebody posted his web-site...

Might be worth asking him directly...

Larry

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of J N Hiller
Sent: Saturday, July 11, 2009 9:40 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] 6 ft balsa

Thanks.
The local hobby shop proprietor told me un-milled large blocks were
available. He also indicated 6' lengths would incur a shipping charge
increase. I guess I will continue to splice 4' sheets.
Jim

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Scotty Orr
Sent: Saturday, July 11, 2009 5:23 PM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] 6 ft balsa

This place has 10 foot lengths (milling required):
http://www.specializedbalsa.com/balsa_blocks.php
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion