[NSRCA-discussion] Optical Isolation of Servo

[krishlan fitzsimmons]

http://www.smart-fly.com/Products/Ignition/ignition.htm


Chris          

--- On Wed, 7/8/09, Ron Van Putte <vanputte at cox.net> wrote:

From: Ron Van Putte <vanputte at cox.net>
Subject: [NSRCA-discussion] Optical Isolation of Servo
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Wednesday, July 8, 2009, 9:09 PM

A customer needs to get rid of interference from the ignition engine he's using, which causes the throttle servo to surge.  I suggested he look into optically isolating the servo from the receiver, to preclude the EMI going down the servo wires to the receiver.  He asked me where he could buy such a device and that's where I ran out of ideas.  I remember that they used to be available, but can't remember who marketed them.  Anybody know?

Ron VP
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090709/0acb788b/attachment.html>