[NSRCA-discussion] BOLLY out of business

Dwayne Brown dwaynenancy at suddenlink.net
Sun Jan 25 15:07:34 AKST 2009


Tony, I'm looking for a set of landing gear for my Ultra Stick that will let
my use a prop bigger than 18".  Do you have anything that might fit that
description?  Dwayne

 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tony
Sent: Sunday, January 25, 2009 5:57 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] BOLLY out of business

 

Gene:
I have been looking at these as well, but didn't have a set to verify yet.
I am a dealer for them, so I will look into getting stock on these.

 

 

Tony Stillman, President

Radio South, Inc.

139 Altama Connector, Box 322

Brunswick, GA  31525

1-800-962-7802

www.radiosouthrc.com

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Gene Maurice
Sent: Sunday, January 25, 2009 11:24 AM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] BOLLY out of business

 

Note: send this twice because of the file size limitation, original message
that included both Pic's got "held"

 

All,

 

I ordered a set of carbon fiber gear from AirBorne Models (Carbon Fiber
Landing Gear PR8200158 6 x 35 x 220 mm) and was waiting till I received them
before responding to this thread. Just got them and they don't look bad
(pics attached). Overall they are about 15mm shorter, 20mm narrower
(track)and 10mm more sweep than Bolly Longs. The base is almost identical
(when you split the Bolly), 50mm x 38mm. Weight is 120g total, also
identical to the Bolly Longs. The finish is excellent. They seem pretty
stiff but have some flex, more that the Bolly's. It'll be awhile till I have
them installed and get a chance to fly with them (gotta paint yet).

 

Now the really good news, $50 + $7 shipping. Here's the link
http://www.airborne-models.com/html/AccessoriesGroup.asp?AGroupID=9 , it's
the split gear , Col 1, Row 3

 

 

Gene Maurice

Plano, TX

AMA 3408 NSRCA 877

PACSS.sgmservice.com

gene.maurice at sgmservice.com

 

 

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Verne Koester
Sent: Saturday, January 17, 2009 10:27 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] BOLLY out of business

 

Ed,

How do you go about seeing the specs and purchasing those gear? Their web
site is a bit confusing, even when translated.

 

Verne Koester

----- Original Message ----- 

From: Ed Alt <mailto:ed_alt at hotmail.com>  

To: General pattern discussion <mailto:nsrca-discussion at lists.nsrca.org>  

Sent: Thursday, January 15, 2009 8:18 PM

Subject: Re: [NSRCA-discussion] BOLLY out of business

 

IMO, the CF landing to emulate is what Wistmodel makes.  Try to top them for
light weight, strength, flexibility and ability to absorb shock and not tear
your airplane apart.  They look great too. Bolly's are nice, but don't hold
a candle to what Wistmodel produces for the Prestige.

 

Ed

----- Original Message ----- 

From: Gray E Fowler <mailto:gfowler at raytheon.com>  

To: General pattern discussion <mailto:nsrca-discussion at lists.nsrca.org>  

Sent: Thursday, January 15, 2009 5:56 PM

Subject: Re: [NSRCA-discussion] BOLLY out of business

 


Anthony 

What did you think about the ES gear twist? That is the wheel going toe in-
toe out hitting small bumps. ES had nothing but zero degree fibers. That is
the one design issue I am conteplating at the moment. 

Also considering that all new planes are widebody that is what needs to be
addressed..BUT having a 1 continuous gear will be more weight. I am thinking
it is better to split the gear for a weight savings.  If we make two pieces,
and either piece can be a left or a right, then a broken gear is only on one
side. Any advantage to that?




Gray Fowler
Senior Principal Chemical Engineer
Radomes and Specialty Apertures
Technical Staff Composites Engineering
Raytheon 


Anthony Romano <anthonyr105 at hotmail.com> 
Sent by: nsrca-discussion-bounces at lists.nsrca.org 

01/15/2009 04:18 PM 


Please respond to
General pattern discussion <nsrca-discussion at lists.nsrca.org>


To

<nsrca-discussion at lists.nsrca.org> 


cc

 


Subject

Re: [NSRCA-discussion] BOLLY out of business

 


 

 




Graph Tech is not for us. I am sure their stuff is well suited for the IMAC
style planes that they are designed for but too heavy and way too stiff for
our use. 
I went through their website and picked a gear based on dimension of the ES
2+ ounces heavier and twice as thick with zero flex. Broke the gear out of
my Black Magic many times when hitting small holes in the runway. Rick
donated his ES gear and life has been much better. 

Anthony


  _____  



From: jlachow at hotmail.com
To: nsrca-discussion at lists.nsrca.org
Date: Thu, 15 Jan 2009 15:59:26 -0500
Subject: Re: [NSRCA-discussion] BOLLY out of business

Anyone have any luck with the Graph Tech RC stuff?  Only experience was with
some smaller electrics that worked just fine. They have carbon pants and
spinners, as well.


  _____  



From: tony at radiosouthrc.com
To: nsrca-discussion at lists.nsrca.org
Date: Thu, 15 Jan 2009 15:00:23 -0500
Subject: Re: [NSRCA-discussion] BOLLY out of business


Thanks, Jim.  Those are $112.00 I think. about double that of the Bolly..
Not sure how that will go... but if there are no other choices. 
  
  
Tony Stillman, President 
Radio South, Inc. 
139 Altama Connector, Box 322 
Brunswick, GA  31525 
1-800-962-7802 
www.radiosouthrc.com 


  _____  



From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Woodward, Jim
(US SSA)
Sent: Thursday, January 15, 2009 2:52 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] BOLLY out of business 
  
Tony, 
  
Luiz at Net Box Hobby carrys the CA carbon gear. 
  
Thanks, 
Jim 
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Tony
Sent: Thursday, January 15, 2009 2:36 PM
To: 'General pattern discussion'
Subject: [NSRCA-discussion] BOLLY out of business 
  
I just received conformation that BOLLY has gone out of business.
Unfortunately, this is a major supplier of CF landing gear and wheel pants.
I have been awaiting a shipment of several items, and now it does not look
like that will happen.  I am working now to determine if there are any
gear/wheel pants available.   
  
The really bad thing is that I am not sure what options we have left, other
than going with a kit/arf manufacturer's gear.  Ed Skorpa dropped his gear
last year. 
  
  
  
Tony Stillman, President 
Radio South, Inc. 
139 Altama Connector, Box 322 
Brunswick, GA  31525 
1-800-962-7802 
www.radiosouthrc.com 
  

 


  _____  


Windows LiveT HotmailR: Chat. Store. Share. Do more with mail.
<http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t1_hm_justgotbetter_how
itworks_012009> See how it works.


  _____  


Windows LiveT HotmailR: Chat. Store. Share. Do more with mail.
<http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t1_hm_justgotbetter_how
itworks_012009> See how it
works._______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 


  _____  


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


  _____  


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090126/dfdd6df0/attachment.html>


More information about the NSRCA-discussion mailing list