[NSRCA-discussion] Vinyl Graphics

[Tony]

Yes, there is a software that works with it that allows the Cricut to
connect to a PC to cut from the PC.



Tony Stillman, President
Radio South, Inc.
139 Altama Connector, Box 322
Brunswick, GA  31525
1-800-962-7802
www.radiosouthrc.com

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
rcmaster199 at aol.com
Sent: Tuesday, January 20, 2009 11:45 AM
To: nsrca-discussion at lists.nsrca.org
Subject: [NSRCA-discussion] Vinyl Graphics


A reasonably priced piece of equipment is the Cricut Expressions for 
cutting pre-programmed graphics of all sorts, in sticky backed vinyl, 
mylar, masking stock, etc. Wal Mart carries it for around 300$. The 
problem is that it has its own software which isn't as suitable for 
what we need, except for lettering (different sizes and fonts come 
standard)

Has anyone been able to adapt this thing to accept instructions from a 
PC? If yes, then it could cut any CAD drawings, shapes, patterns one 
could come up with. It could make paint masking a cinch

Been unable to get in touch with the company that makes it to find out 
if it can. A laser cutting head would also be great.

MattK


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion