[NSRCA-discussion] 14Z to 12Z

[John Pavlick]

That's what I was talking about. Let us know how it works. I haven't tried it yet.

John Pavlick
http://www.idseng.com
  ----- Original Message ----- 
  From: Keith Black 
  To: 'General pattern discussion' 
  Sent: Sunday, February 22, 2009 8:57 PM
  Subject: Re: [NSRCA-discussion] 14Z to 12Z


  Look at the following link. Fifth file from top "Model Data Converter".

   

  http://www.futaba-rc.com/sellsheets/index.html

   

   

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Wayne Galligan
  Sent: Sunday, February 22, 2009 7:36 PM
  To: nsrca-discussion at lists.nsrca.org
  Subject: [NSRCA-discussion] 14Z to 12Z

   

  Keith Black and I were discussing whether or not you can transfer model setups from a 14Z card to a 12Z card.  Or is there is procedure needed to do this?

   

  Wayne Galligan



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090223/60a3b6ef/attachment.html>