[NSRCA-discussion] FW: Odd Ball Tool Holder 2

[Richard Strickland]

Vicente, first you need to get the nomenclature right-- the first tool you mentioned is an 'adjuster' which is normally used to break the most expensive part fairly close to the item you are trying to adjust.  The second item you mentioned is a 'heat transfer device' commonly used at pattern contests to transfer the heat from a propane torch used for bearing removal from an engine--to the palm of one's hand. I am fairly expert at both of those uses.  The pic depicts this mag strip has a little grunt.

I have used both items on retracts in days past.

 

RS
 


Date: Wed, 4 Feb 2009 19:00:32 +0000
From: vicenterc at comcast.net
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] FW: Odd Ball Tool Holder 2





Richard,

 

Do you use that big hammer and plumber pliers to fix your electric motors?  Very compact and easy to do.  Thanks for sharing.

 

Vicente "Vince" Bortone


----- Original Message -----
From: "Richard Strickland" <pamrich47 at hotmail.com>
To: "NSRCA" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, February 4, 2009 10:22:09 AM GMT -06:00 US/Canada Central
Subject: [NSRCA-discussion] FW: Odd Ball Tool Holder 2




 2 of 4
RS








Get more out of the Web. Learn 10 hidden secrets of Windows Live. Learn Now 
_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_________________________________________________________________
Get more out of the Web. Learn 10 hidden secrets of Windows Live.
http://windowslive.com/connect/post/jamiethomson.spaces.live.com-Blog-cns!550F681DAD532637!5295.entry?ocid=TXT_TAGLM_WL_domore_092008
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090204/80687f06/attachment.html>