[NSRCA-discussion] Futaba Servos

[J Shu]

John, 

You just fly slower than I do that's all.

Regards,
Jason
www.shulmanaviation.com
www.composite-arf.com

----- Original Message ----- 
From: "John Fuqua" <johnfuqua at embarqmail.com>
To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, December 10, 2009 6:42 PM
Subject: Re: [NSRCA-discussion] Futaba Servos


>I defer to Jason on the nuances of flying but I have been using them in my
> electric VF3s and they have worked just fine.  I cannot feel the difference
> Jason does but that's why he is what he is.
> John
> 
> -----Original Message-----
> From: nsrca-discussion-bounces at lists.nsrca.org
> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of J Shu
> Sent: Thursday, December 10, 2009 4:54 PM
> To: General pattern discussion
> Subject: Re: [NSRCA-discussion] Futaba Servos
> 
> I've flown the same design plane, one with 9650's and the other with 9151's,
> and there was a difference. The one with the 51's was a 
> much better (predictable) snapping plane. The 50's were speed sensitive
> (downlines were never the same).
> 
> Andrew is right about the low profile Futaba's. I was running the BL-551,
> 1.6oz, 
> (http://www.futaba-rc.com/servos/brushlessservos.html) in my Integrals and
> now in my Valiant. The 9551, 1.6oz, 
> (http://www.futaba-rc.com/servos/digitalservos.html) is the non-brushless
> version (that Andrew was running in his Integrals). The JR 
> 9411 will also work fine, I just don't have experience with them.
> 
> Regards,
> Jason
> www.shulmanaviation.com
> www.composite-arf.com
> 
> ----- Original Message ----- 
> From: "Dave" <DaveL322 at comcast.net>
> To: "'General pattern discussion'" <nsrca-discussion at lists.nsrca.org>
> Sent: Thursday, December 10, 2009 5:30 PM
> Subject: Re: [NSRCA-discussion] Futaba Servos
> 
> 
>> Dave,
>>
>> Quite a few guys are running the JR 9411 on ailerons on 2M stuff.  You'll
>> save about 1.5 oz for the pair.
>>
>> Regards,
>>
>> Dave Lockhart, Team JR
>>
>>
>> -----Original Message-----
>> From: nsrca-discussion-bounces at lists.nsrca.org
>> [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Dave Burton
>> Sent: Thursday, December 10, 2009 5:07 PM
>> To: 'General pattern discussion'
>> Subject: [NSRCA-discussion] Futaba Servos
>>
>> I have a question about Futaba servos (I'm a JR user) from some Futaba
>> flyers.
>> Are the Futaba 9650 digital servos suitable for ailerons on an electric 2
>> meter plane (Intrgral)? I'm looking to save a couple ounces over the full
>> size JR 8411SA I'm using now.
>> Thanks,
>> Dave Burton
>>
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>>
>> _______________________________________________
>> NSRCA-discussion mailing list
>> NSRCA-discussion at lists.nsrca.org
>> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion