[NSRCA-discussion] Engines

[Bill Glaze]

Tony:
Superb idea--I'll do it.  It's been a great engine, never needed anything.  When the engines had been out a couple of years, I remember Frank Kelley telling me that Donny Weitz had 135 gals. of fuel through his, with absolutely no problems.  My experience parallels.
Bill
  ----- Original Message ----- 
  From: Tony 
  To: 'General pattern discussion' 
  Sent: Thursday, August 27, 2009 6:36 PM
  Subject: Re: [NSRCA-discussion] Engines


  Bill:
  Get Richard to send you a piston/sleeve/ring for it and a set of bearings..  That is about all you would need for a rebuild to last another 20 years!

   

  Tony Stillman, President

  Radio South, Inc.

  139 Altama Connector, Box 322

  Brunswick, GA  31525

  1-800-962-7802

  www.radiosouthrc.com


------------------------------------------------------------------------------

  From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bill Glaze
  Sent: Thursday, August 27, 2009 5:19 PM
  To: General pattern discussion
  Subject: Re: [NSRCA-discussion] Engines

   

  Tony and Jay:

  Jay first:  I've used the Webra 1.20 2 stroke, and while it's a good engine, mine is worn out.  That doesn't rule out a 2 stroke, but I've always felt that the 4 stroke "followed" what I wanted for pattern somewhat better than the 2 stroke.  But, no, I'm not locked in to a 4 stroke.

  Tony:

  Actually, I have the best possible engine now.  Buff Miller who was flying his Sport at Green Sea with a Y.S. 110, came up to me after the 3rd round, and said "You're definitely outperforming me."  Which I was, after observing Buff's flight.  Most of my Pattern is flown at a quite reduced setting, but I have LOTS more under my left thumb solely for maximum vertical figures.  My sole concern is that a 20 year old engine, (I bought it in 1989, when they were first introduced) can't last forever, and parts can become a problem.  I don't want to ground the airplane for want of a powerplant suitable for Pattern.  So, I'm gathering pertinent information ahead of time.  Actually, it's been running perfectly for years; I just know that, (like me<G>)  it can't go on forever, and I want to be ready with information as to where to go when I need to.

  Gentlemen, thanks for your input.  It is definitely noted, and will be condsidered.

  Bill Glaze

  NSRCA 2388

  AMA 2221

    ----- Original Message ----- 

    From: Tony 

    To: 'General pattern discussion' 

    Sent: Thursday, August 27, 2009 4:01 PM

    Subject: Re: [NSRCA-discussion] Engines

     

    The YS110 would be an option, but it sounds like you HAVE the best engine!

     

    Reminds me of a situation I had years ago.  

    I was 2nd in Expert (this is before turn-around) in 1990 at the NATS.  Only 1 point out of 1st, RATS!  Anyway.  This was my first NATS since 1983, when I also placed 2nd.  After the NATS I got a call from the nice people at Byron Fuels..  They wanted me to fly their fuel.  I explained to them that I appreciated their interest in me, but that I was very happy with Morgan/Cool Power fuels.  They persisted in telling me that they had the BEST fuel on the market and that it was superior to Cool Power.  Well, I had to take exception to that.  

    You see, in the 2 ½ years leading up to the 1990 NATS, I never lost a single ROUND at a pattern contest in Expert class!  I flew in 10-15 contests each year.  In that period of time, I had not changed a single part in my YS .60RE engine, other than a glow plug.  The engine never quit, was 110% reliable.  So, I explained to the Byron folks, your fuel CAN'T be any better!  It MIGHT be as good, but can't be better..

     

    Long story to say that it sounds like you HAVE the best engine now!!  Why change?

     

    Tony Stillman, President

    Radio South, Inc.

    139 Altama Connector, Box 322

    Brunswick, GA  31525

    1-800-962-7802

    www.radiosouthrc.com


----------------------------------------------------------------------------

    From: nsrca-discussion-bounces at lists.nsrca.org [mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bill Glaze
    Sent: Thursday, August 27, 2009 3:36 PM
    To: General pattern discussion
    Subject: [NSRCA-discussion] Engines

     

    All:

    Looking for opinions here.  I've been flying a Piedmont sport that tips the scales at 9# even.  Powering it with a Y.S. 1.20 FS, and it's now 20 years old.  Runs fine, but maybe not forever.  It turns an APC at 8800+ and offers plenty of performance.

    Question:  Is there anything else on the market that offers comparable performance?

    This is probably the most user-friendly  engine I've ever used; not moody, always easy starting, runs at a repeatable setting every time, (1-1/4 turns out on the main needle) and I'm wondering if there is anything else out there that can match this performance/ease of use?

    Thanks.  BTW: Opinions are O.K.; I realize these things are highly subjective and anecdotal, and subject to individual viewpoints.

     

    Bill Glaze

    NSRCA 2388


----------------------------------------------------------------------------

    _______________________________________________
    NSRCA-discussion mailing list
    NSRCA-discussion at lists.nsrca.org
    http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090828/627ade20/attachment.html>