[NSRCA-discussion] Futaba 10CAG

[J N Hiller]

I like the 9C OK but wasn't very interested in the conversion besides it's
been my primary transmitter since 2002. In five years I wore out the ratchet
so I expect the gimbels may not be up to the job any more.
Jim

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Jay Marshall
Sent: Monday, August 17, 2009 12:08 PM
To: 'General pattern discussion'
Subject: Re: [NSRCA-discussion] Futaba 10CAG

If you really like your 9C then buy the 2.4 module for it. It will work with
a number of Futaba FAST receivers and you can still support your 72 MHz
equipment. Personally, after losing several planes to interference I
couldn't get away from 72 MHz FAST (pun intended) enough!

Jay Marshall

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Bill's Email
Sent: Monday, August 17, 2009 1:08 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Futaba 10CAG

J N Hiller wrote:
> Had a problem with my old 72mh stuff yesterday. What do you think of the
> Futaba 10CAG 2.4GHz system? Is this an adequate pattern radio? It looks
like
> it offers a little more than my 9C. OR should I consider a 12FGA or 12Z.
> Pros and Cons Please.
> Jim Hiller
>


Here's a nice comparison chart.

http://www.futaba-rc.com/radios/feature-compare.html

You can find the manuals for the 10 and 12 channel radios here:
http://www.futaba-rc.com/manuals/index.html

The soon to be released 8FG looks promising as well. It is listed ont he
chart as well.




_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion