[NSRCA-discussion] Trim change after thought

[J N Hiller]

Thanks Ed & Bill for point me to the aluminum stopper setup. I thought I had
seen it somewhere. Looks bullet proof. I'll swing by the hobby shop on the
way to the field. If they don't have it they will get it by next week, Heck
it will take that long to cleanup the fuselage.
Jim

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of Ed White
Sent: Thursday, August 06, 2009 9:45 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Trim change after thought

Like this?

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXBWL6&P=ML
<http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXBWL6&P=ML>

  _____

From: J N Hiller <jnhiller at earthlink.net>
To: NSRCA Mailing List <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, August 6, 2009 11:35:32 AM
Subject: [NSRCA-discussion] Trim change after thought

OOPS! In the future I will probably be using aluminum inside and outside
disks on the fuel tank stoppers.
Is there a source for such or do I need to make them myself?
Jim Hiller

_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org <mailto:NSRCA-discussion at lists.nsrca.org>
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090806/60e79e30/attachment.html>