[NSRCA-discussion] Rad-Tad

[Jim Quinn]

The Rad-Tad is an original design of George, which was featured in the KFactor as a "Practical Solution."

Jim Quinn




________________________________
From: "jeffghughes at comcast.net" <jeffghughes at comcast.net>
To: Jim Quinn <jaqfly at prodigy.net>; General pattern discussion <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, April 1, 2009 7:40:47 PM
Subject: Re: [NSRCA-discussion] Rad-Tad


What's a Rad-Tad look like?
 
 

----- Original Message -----
From: "Jim Quinn" <jaqfly at prodigy.net>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Wednesday, April 1, 2009 2:38:58 PM GMT -05:00 US/Canada Eastern
Subject: [NSRCA-discussion] Rad-Tad


Great Job on the Rad-Tad design George!!!
 
I now have 5 flights and am still in the process of trimming, but it does great knife edge, 4 and 8 point rolls. It has plenty of power for verticals. My only problem was I flew the first two flights unpainted, that made it harder to orient myself. With zero ground roll, I think I'll put on a small wheel to give it a little easier time on landing.
 
Jim Quinn
_______________________________________________ NSRCA-discussion mailing list NSRCA-discussion at lists.nsrca.org http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20090402/fb07fc88/attachment.html>