[NSRCA-discussion] E-Question HXT motors

schroetere at bellsouth.net schroetere at bellsouth.net
Fri Sep 26 09:17:26 AKDT 2008


Hey Anthony,

I am using the Castle Creations HV85 and a mix of Tanic and Vampower batteries. I haven't used a Jeti, but I'm sure it would do well also. My packs are between 4500-5000 mah flying the masters pattern.

Emory.
-------------- Original message from Anthony Abdullah <aabdu at sbcglobal.net>: -------------- 

Emory,
What ESC and battery did you use with that. Is the Jeti spin 99 still the right choice for that motor?

Thanks for the info.
--- On Fri, 9/26/08, Emory Schroeter <schroetere at bellsouth.net> wrote:

From: Emory Schroeter <schroetere at bellsouth.net>
Subject: Re: [NSRCA-discussion] E-Question HXT motors
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Date: Friday, September 26, 2008, 8:08 AM


Hey Anthony, 


>From my experience, I was amazed at how well the HXT motor performed. I don't remember the stats exactly, but they were very close to the performance I was seeing with the AXI. I believe it was slightly less efficient (maybe 2 more amps drawn) and had about 200 less RPM than the AXI. Like someone mentioned, I kept waiting for it to fail, but it didn't. I had well over 100 flights on it when I decided to plant the airplane in the ground. Based on my experience with it, I wouldn't hesitate to try one again in the future. I mostly used the APC 20x15 prop.


Emory Schroeter.




On Sep 25, 2008, at 1:30 PM, Anthony Romano wrote:


Hi Mike,
Are you sure on that prop size?





From: kerlock at comcast.net
To: aabdu at sbcglobal.net; nsrca-discussion at lists.nsrca.org
Date: Thu, 25 Sep 2008 12:59:16 -0400
Subject: Re: [NSRCA-discussion] E-Question HXT motors



Ok, some in depth answers.

We did in fact test this motor last season on a Black Magic V2, flying masters. We used the HXT 63-64B 230kv motor. We used a CC HV85 controller, Tanic and vampower packs.

Power is certainly not a problem for this motor. It is fairly comparable to the AXI. 2700 watts, 82 amps, 6200 RPM on an APC 20x14. the motor never got over 110 degrees.

Longevity: we got well over 100 flights on it before the plane was lost, no problems whatsoever. This was using Esprit stand off mounts as well, o nose mounting.

No can issues, nothing, it just delivered. your results may vary of course. These are "cheap" chinese motors and you do not have the support structure in place like the name brands. but considering you can buy almost 4 of them for the price of one AXI, it's pretty interesting.

I've run a lot of these chinese motors and maybe I'm just lucky, but I just don't have problems. I keep hearing about problems with darned near everything, including name brand stuff, and the only issue we've run into yet was a very early bearing failure with an AXI...that's all. Ever.

I have yet to install one of these on a VF3, and wonder about it because by it's very nature you will have to use more power to fly it. I realize 82 amps is a lot, but the packs never got warm, nor did the speed control or motor, so who knows.

in short, if this is your first forray into electrics of this size, you would probably be better off with the AXI just from the standpoint of support. But so far I can't find a thing wrong with this motor, or else I am just that lucky (and THAT is highly unlikely, trust me!)

-Mike

----- Original Message -----
From: Anthony Abdullah
To: General pattern discussion
Sent: Thursday, September 25, 2008 12:04 PM
Subject: [NSRCA-discussion] E-Question HXT motors


As I am doing my research into the world of electric pattern I have come across the HXT line of electric motors. It appears that the HXT 63-64 B230 is a fraction of the cost of the comparable AXI motor ($60 vs.$200+) with very similar performance numbers, physical dimensions, etc. In fact, according to the info I saw it is even 12 grams lighter.

Being a realist I have to ask the question; what's the catch? Will it burn out after three flights, does it run excessively hot, does it smell like bacon? I don't get it. Is it just a cheap Chinese knock off, a very good value, or both? What I really want to know is, is the motor viable for F3A pattern?

I appreciate any information you guys can provide, particularly from those who have used them or seen them run.

Thanks a bunch
Anthony





E-mail message checked by Spyware Doctor (5.5.1.322)
Database version: 5.10780e
http://www.pctools.com/spyware-doctor/




_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion



E-mail message checked by Spyware Doctor (5.5.1.322)
Database version: 5.10780e
http://www.pctools.com/en/spyware-doctor/





E-mail message checked by Spyware Doctor (5.5.1.322)
Database version: 5.10780e
http://www.pctools.com/spyware-doctor/



Stay up to date on your PC, the Web, and your mobile phone with Windows Live. See Now _______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080926/bc2cf8e5/attachment.html>


More information about the NSRCA-discussion mailing list