[NSRCA-discussion] JR 10X conversion to LiPo

[Keith Black]

After further consideration I went back to NiCad batteries. JR recommends against this due to the higher voltage AND I had a synthesized RX module go bad while I was using the LiPo's. That being said, I used the standard non-synth modules for about two years with this setup.

Keith
  ----- Original Message ----- 
  From: Charles Hochhalter 
  To: General pattern discussion 
  Sent: Monday, September 22, 2008 12:14 PM
  Subject: Re: [NSRCA-discussion] JR 10X conversion to LiPo


        Keith Black did this conversion and posted it on www.2dogrc.com website for their lipo transmitter offering.

        Good Luck... let me know if you cant find it.

        Chuck Hochhalter
        Team 2DogRC

        --- On Mon, 9/22/08, vicenterc at comcast.net <vicenterc at comcast.net> wrote:

          From: vicenterc at comcast.net <vicenterc at comcast.net>
          Subject: [NSRCA-discussion] JR 10X conversion to LiPo
          To: "NSRCA NSRCA" <nsrca-discussion at lists.nsrca.org>
          Date: Monday, September 22, 2008, 3:56 PM


          Has anyone done the conversion?

          Thanks,

          --
          Vicente "Vince" Bortone
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion 



------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080922/a41294b1/attachment.html>