[NSRCA-discussion] Thunder Power data cable ends

[Scott Smith]

I don't have a source but if you get a new cable, pot the wires with a
little JB-Weld at the connector.  This will keep the wires from breaking at
the crimp.  Also, if you break off the locking tab, it's easier to connect
and disconnect.  

 

 

 



 

 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Stuart Chale
Sent: Monday, September 08, 2008 11:04 AM
To: NSRCA Mailing List
Subject: [NSRCA-discussion] Thunder Power data cable ends

 

Does anyone have a source for the 3 pin female data cable ends for the 

TP charger to balancer connection?

They have a habit of breaking usually right at the pin making it 

difficult to repair.  A prewired pigtail or double female extension that 

could be cut in half would allow easy repairs and hopefully cheaper than 

$10 to replace the cable each time it breaks.

 

Thanks,

Stuart C.

 

_______________________________________________

NSRCA-discussion mailing list

NSRCA-discussion at lists.nsrca.org

http://lists.nsrca.org/mailman/listinfo/nsrca-discussion

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080908/eb846ef6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 6223 bytes
Desc: not available
URL: <http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080908/eb846ef6/attachment.jpe>