[NSRCA-discussion] Futaba 8-channel 2.4 GHz Module/Receiver

Alfredo Betancourt aeromodelismo1 at yahoo.com
Wed Nov 12 07:34:53 AKST 2008


Ron:

Solid green means radio binded.
Blinking green means radio binded AND failsafe activated.

Regards,

Alfredo


--- On Mon, 11/10/08, Ron Van Putte <vanputte at cox.net> wrote:

> From: Ron Van Putte <vanputte at cox.net>
> Subject: Re: [NSRCA-discussion] Futaba 8-channel 2.4 GHz Module/Receiver
> To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
> Date: Monday, November 10, 2008, 6:39 PM
> That's what I figured, but the instructions say,
> "After the radio link has been established (as
> indicated by either a solid green LED or a blinking green
> LED).
> 
> Ron VP
> 
> On Nov 10, 2008, at 6:16 PM, Stuart Chale wrote:
> 
> > You have to hold the receiver button for a bit before
> it will bind.  But solid green is what you want.  Blinking
> green means that it is detecting a 2.4 signal but not bound.
> > Stuart C.
> > 
> > Ron Van Putte wrote:
> >> I tried one of the Futaba 8-channel
> module/receiver combinations on 2.4 GHz with my Futaba 9ZAP
> transmitter.  The instructions are somewhat misleading, at
> least they are to me .  The instructions talked about
> pushing the button on the module and then pushing the button
> on the receiver.  The receiver is supposed to bind to the
> transmitter.  The question is what indication you get when
> the receiver is bound to the transmitter.  I thought (they
> don't say what to look for) I'd see the green LED go
> from a blinking green to solid green.  That didn't
> happen and I tried it half a dozen times.  Then, on a whim,
> I plugged a servo into the receiver before pushing the
> receiver button.  Low and behold, the LED turned solid
> green.  Later in the instructions they talk about range
> checking and say, "After the radio link has been
> established (as indicated by either a solid green LED or a
> blinking green LED), ....."  Huh?!  EITHER solid or
> blinking green is OK?  Now I'm really confused.
> >> 
> >> Ron Van Putte
> >> _______________________________________________
> >> NSRCA-discussion mailing list
> >> NSRCA-discussion at lists.nsrca.org
> >>
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> >> 
> >> 
> > 
> > _______________________________________________
> > NSRCA-discussion mailing list
> > NSRCA-discussion at lists.nsrca.org
> >
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
> 
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


      


More information about the NSRCA-discussion mailing list