[NSRCA-discussion] Which servo?

[kvelez at comcast.net]

That is a good selection, I personally use those same servos but I like the DS8417 in the elevator, very good if you like a fast elevator servo.

Ken

-------------- Original message -------------- 
From: "Ron Neeedham" <ron at inweldcorp.com> 

Hi guys;

I just purchased my first full sized used pattern plane.  After starting my radio installation, I found that the servos are in various states of wearing out.  I want to replace all servos on control surfaces.  From studying the JR list of servos, it looks like DS8411SA is a good choice for rudder and DS9411SA on elevator and ailerons.  Do you agree?

I have been flying an Oxalys 50 and truly love that little plane but am anxious to try the real deal.

Ron Needham
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080601/6cae0383/attachment.html 
-------------- next part --------------
An embedded message was scrubbed...
From: "Ron Neeedham" <ron at inweldcorp.com>
Subject: [NSRCA-discussion] Which servo?
Date: Sat, 31 May 2008 13:57:59 +0000
Size: 682
Url: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080601/6cae0383/attachment.mht