[NSRCA-discussion] Desperate

[Lisa & Larry]

Ahhh, I missed the change to a Hatori header.

 

Different problem.

 

Larry

 

  _____  

From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of JShulman
Sent: Wednesday, May 28, 2008 7:12 PM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Desperate

 

What about the o-rings around the valves

 

Regards,
Jason
www.jasonshulman.com
www.shulmanaviation.com
www.composite-arf.com 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of John Konneker
Sent: Wednesday, May 28, 2008 8:04 PM
To: Discussion List
Subject: [NSRCA-discussion] Desperate

I have a bad fuel/exhaust leak on my YS 1.60.  It started just before my NMP
header split but continued after replacing with 
a Hatori header and 821 muffler.  I'm getting pretty desperate trying to
find it.  I have replaced all the fuel lines.  I have snugged up 
the flange that screws in to the head.  I have retightened the header
flange.  I have checked the valve cover gasket.  I have checked 
the head bolts but it still leaks.  I consider the leak bad enough that if I
don't get it fixed by tomorrow I will have to miss my second contest in a
row because of it.  It really soaks the inside of the engine compartment on
the left (exhause) side.  Bad enough that when I run my finger down the
firewall it is wet with oil.  The engine mount beams on the bottom sides are
almost dripping.  
Any thoughts?
Thanks!
JLK
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080529/bfe2808f/attachment.html