[NSRCA-discussion] Desperate

John Konneker jlkonn at hotmail.com
Wed May 28 16:03:55 AKDT 2008


I have a bad fuel/exhaust leak on my YS 1.60.  It started just before my NMP header split but continued after replacing with 
a Hatori header and 821 muffler.  I'm getting pretty desperate trying to find it.  I have replaced all the fuel lines.  I have snugged up 
the flange that screws in to the head.  I have retightened the header flange.  I have checked the valve cover gasket.  I have checked 
the head bolts but it still leaks.  I consider the leak bad enough that if I don't get it fixed by tomorrow I will have to miss my second contest in a row because of it.  It really soaks the inside of the engine compartment on the left (exhause) side.  Bad enough that when I run my finger down the firewall it is wet with oil.  The engine mount beams on the bottom sides are almost dripping.  
Any thoughts?
Thanks!
JLK
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080529/4b908cc9/attachment.html 


More information about the NSRCA-discussion mailing list