[NSRCA-discussion] Jeti 90 ESC coursing radio interference

[John Pavlick]

I thought only gas motors needed a choke! LOL

BTW - It's not a bad idea to twist the wires in the servo leads too. Not as good a s a fully shielded cable but better than nothing I suppose. Has anyone looked at this stuff with a 'scope to see what's really going on and if there are some things that work better than others?

John Pavlick
http://www.idseng.com
  ----- Original Message ----- 
  From: Stuart Chale 
  To: General pattern discussion 
  Sent: Sunday, May 25, 2008 7:53 AM
  Subject: Re: [NSRCA-discussion] Jeti 90 ESC coursing radio interference


  I agree with the others.  I have the same controller with Hacker motors and kept going into hold till I added a Futaba choke.  Did the trick.
  Stuart

  Paul Hepworth wrote: 
    Jeti 90 ESC coursing radio interference

    I am getting radio interference when running my Axi 5330/F3a and Jeti 90 ESC.  Please can some please give me any ideas how to fix this problem.  I have tried a different receiver and I have tried unplugging the CC BEC and then used a separate battery for the receiver. 

----------------------------------------------------------------------------
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
  

------------------------------------------------------------------------------


  _______________________________________________
  NSRCA-discussion mailing list
  NSRCA-discussion at lists.nsrca.org
  http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080525/0c579680/attachment.html