[NSRCA-discussion] Prop Balancer

[Dwayne Brown]

I've got all the parts except the shaft and the two end pieces to hold the
prop.  They are similar to the DuBro.  Dwayne

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of Karl G.
Mueller
Sent: Thursday, May 22, 2008 9:19 AM
To: General pattern discussion
Subject: Re: [NSRCA-discussion] Prop Balancer

"High Point Balancer".

Will do any size prop and balance Spinners as well.
Used it for almost 25 years now.
Extended the base and use a longer shaft to do the big
spinners for Imac set-ups.

Karl G. Mueller
kgamueller at rogers.com

----- Original Message ----- 
From: "Walter Nasse" <wwnasse at figment.ca>
To: "NSRCA Mailing List" <nsrca-discussion at lists.nsrca.org>
Sent: Thursday, May 22, 2008 8:55 AM
Subject: [NSRCA-discussion] Prop Balancer


> BlankHi All!
>
> What do you use to balance the big E props? My magnetic balancer just
> doesn't cut the mustard.
>
> Walter
>
> No virus found in this outgoing message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.24.0/1459 - Release Date: 5/21/2008
> 5:34 PM
>
>
> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
>


_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion


-- 
No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.524 / Virus Database: 269.23.21/1456 - Release Date: 5/20/2008
6:45 AM