[NSRCA-discussion] Rudder servo wheel part 2

[John Pavlick]

Ron,
Don't waste your time. Mine are running straight like Jason's. Guess that 
answers that question. <LOL>

John Pavlick
http://www.idseng.com

----- Original Message ----- 
From: <ronlock at comcast.net>
To: "General pattern discussion" <nsrca-discussion at lists.nsrca.org>
Sent: Tuesday, May 20, 2008 7:06 PM
Subject: Re: [NSRCA-discussion] Rudder servo wheel part 2


> Hi Chris,
>
> I set up cables crossed with a wheel, or an arm.   I use vinyl coated 
> kevlar cable,
> and the slight touch where they cross has not been a problem.
> As for the feel of straight cables that Jason likes - maybe - if I run 
> mine
> straight like Jason, I could fly like Jason?    Naaaa.
>
> Ron Lockhart
> -------------- Original message ----------------------
> From: "JShulman" <jshulman at cfl.rr.com>
>> Chris,
>>
>> I don't know how it affects the cable in the wheel, but I've tried 
>> crossing
>> cables in a few planes and in each one I've changed them back to 
>> straight.
>> Something in the "feel" with the crossed cables never felt right to me. I
>> know others like them crossed, so I guess it's all in what works.
>>
>> Regards,
>> Jason
>> www.jasonshulman.com
>> www.shulmanaviation.com
>> www.composite-arf.com
>>
>>   -----Original Message-----
>>   From: nsrca-discussion-bounces at lists.nsrca.org
>> [mailto:nsrca-discussion-bounces at lists.nsrca.org]On Behalf Of chris moon
>>   Sent: Tuesday, May 20, 2008 6:44 PM
>>   To: nsrca-discussion at lists.nsrca.org
>>   Subject: [NSRCA-discussion] Rudder servo wheel part 2
>>
>>
>>   I have the rudder servo setup now with the Hangar 9 servo wheel. The
>>   cables from the servo to the rudder are not crossed and run straight
>>   back. My question is that it would seem that crossing the cables would
>>   actually be a good idea when using a wheel since that would increase 
>> the
>>   angle that the cable meets the wheel and make it less likely for the
>>   cable to get derailed. Does anyone who is using a wheel have any
>>   input? Should I just leave them straight or cross them? By the way,
>>   the cables are not inside any tubes and would be rubbing together if I
>>   crossed them.
>>
>>   Thanks
>>
>>   Chris
>>
>>
>>
>> ----------------------------------------------------------------------------
>> --
>>   Make every e-mail and IM count. Join the i'm Initiative from Microsoft.
>> No virus found in this outgoing message.
>> Checked by AVG.
>> Version: 7.5.524 / Virus Database: 269.23.21/1454 - Release Date: 
>> 5/19/2008
>> 7:44 AM
>
>
>


--------------------------------------------------------------------------------


> _______________________________________________
> NSRCA-discussion mailing list
> NSRCA-discussion at lists.nsrca.org
> http://lists.nsrca.org/mailman/listinfo/nsrca-discussion