[NSRCA-discussion] Rudder pull-pull

[Dwayne Brown]

Is this Buddy Brammer?  Dwayne

 

-----Original Message-----
From: nsrca-discussion-bounces at lists.nsrca.org
[mailto:nsrca-discussion-bounces at lists.nsrca.org] On Behalf Of
BUDDYonRC at aol.com
Sent: Friday, May 09, 2008 11:07 AM
To: nsrca-discussion at lists.nsrca.org
Subject: Re: [NSRCA-discussion] Rudder pull-pull

 

Chris 

In my example a large diameter servo wheel is used with new connection
points drilled on a center line approx. 1/4" toward the rudder from the
centerline of the servo shaft.

the 1/4" distance must be adjusted to fit the geometry which will provide
equal tension at all positions. On my Impact the distance is 1/4".

Buddy 





  _____  

Wondering what's for Dinner Tonight? Get new
<http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001>  twists on
family favorites at AOL Food.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080510/9e5ceea9/attachment.html