[NSRCA-discussion] TP1010C upgrade to 2.3A

[Ed Alt]

Yep, that worked.  Just tried it.  Saved me a trip to "The Shack". 
 
Thanks
Ed


Date: Sat, 29 Mar 2008 08:25:37 -0400From: schale at optonline.netTo: nsrca-discussion at lists.nsrca.orgSubject: Re: [NSRCA-discussion] TP1010C upgrade to 2.3A
I took it to be a standard 9 volt and used one without issue.StuartEd Alt wrote: 


I see that Thunder Power has this new procedure when upgrading firmware, where you must either place a 10 to 15 ohm 5W resistor in series with the + power lead, or use a 9V FC-1 battery, otherwise void the warranty.  It's not clear to me what is special about a FC-1 battery.  From outward appearances, it looks like any other 9V dry cell, but who knows?  It's apparent that they want to limit the current and voltage during programming by using one of these new methods. Anyone know what the deal is here? ThanksEd

Watch “Cause Effect,” a show about real people making a real difference. Learn more. 
_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
  
_________________________________________________________________
Watch “Cause Effect,” a show about real people making a real difference.  Learn more.
http://im.live.com/Messenger/IM/MTV/?source=text_watchcause
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080329/d2bacf16/attachment.html