[NSRCA-discussion] YS Questions+more - Rolls

ronlock at comcast.net ronlock at comcast.net
Thu Mar 6 04:20:52 AKST 2008


And while your at it, I'd appreciate some discussion of the impact of the top hinge system as seen on Viavat, and Prestige birds -     (top hinged, with fairing that eliminates the gap at deflection)

Thanks, Ron Lockhart

-------------- Original message -------------- 
From: vicenterc at comcast.net 

Nat,

Could you explain why the differential should be different for non-center hinged?  I understand that the mechanical configuration of non-center hinged requires differential to obtain same travel in both directions.  However, the travel up and down should be close to equal.  

Thanks,

--
Vicente "Vince" Bortone

-------------- Original message -------------- 
From: "Nat Penton" <natpenton at centurytel.net> 

Tom
It's just something that is peculiar to the Southern Hemisphere.

Changing wing incidence will not help. Unless things are really screwed up <G>, at our roll rates, centrifugal forces are too low to cause a problem. You want zero differential, aero speaking ( same up/down if center hinged ).

I find the best check is the fast half-roll in the vertical up.        Regards     Nat
----- Original Message ----- 
From: Koenig, Tom 
To: NSRCA Mailing List 
Sent: Wednesday, March 05, 2008 7:24 PM
Subject: Re: [NSRCA-discussion] YS Questions+more


Hi Troy!

Thanks for the info. I thought you would be toiling away on the next developmental stage of these engines!!

Hopefully soon, I can find the time to get flying again. I am looking forward to running this little beast. I am still a little concerned in keeping it quiet though.

Four blade props? I have some of the 18.1 x 12 two bladers but I just cant see how I'll shut the thing up with these paint stirrers??

Also-one more question to any of you out there in pattern land.

I have struggled with aileron differential for years. I am just not happy with the rolls. I have tried various design fixes-but about the only one that seems to work is to get the wing back to 0-0 ( which can be achieved by a few ways, design, mix or thumbs) Differential itself does not seem to work if the wing is POA ( well...it works for half the roll !)
Another black magic fix appears to be to run parallel ailerons-but this only 'sorta' seems to fix it. I like the feel of equal% chord ailerons however.

I am frustrated with it-I like my planes to roll as if they had a string up its ...........well you know!

OK-any 'secrets' I need to know??? Very good elevator work fixes it ( hence my 0-0 comment)

Tom



_______________________________________________
NSRCA-discussion mailing list
NSRCA-discussion at lists.nsrca.org
http://lists.nsrca.org/mailman/listinfo/nsrca-discussion
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080306/3114b912/attachment.html 
-------------- next part --------------
An embedded message was scrubbed...
From: vicenterc at comcast.net
Subject: Re: [NSRCA-discussion] YS Questions+more - Rolls
Date: Thu, 6 Mar 2008 09:10:09 +0000
Size: 1510
Url: http://lists.nsrca.org/pipermail/nsrca-discussion/attachments/20080306/3114b912/attachment.mht 


More information about the NSRCA-discussion mailing list